Registers
The abbreviations given in Column Access are explained in Section Access Types for Registers .
Base Address:
IPC0_REG : 0x41014000
IPC1_REG : 0x41014080
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Take NP’s IPC as an example to describe the function of IPC’s internal registers. The REG_TX_DATA is used to transmit message from NP to AP. (The logic cannot be generated automatically.) |
|
004h |
R/W |
This register is used to record Tx empty. |
|
008h |
R/W |
||
00Ch |
R/W |
This register can ensure that the software can manually clear the Tx register in an emergency. |
|
010h |
R |
||
014h |
R |
||
018h |
R/W |
REG_IPC_DATA
Name: Tx_Rx Register
Size: 32
Address offset: 000h
Read/write access: R/W
Take NP’s IPC as an example to describe the function of IPC’s internal registers. The REG_TX_DATA is
used to transmit message from NP to AP. (The logic cannot be generated automatically.)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
TX0_DATA |
R/W |
0x0 |
After preparing descriptor, data and corresponding memory.
If the corresponding Rx full status bit in REG_ISR_CPU0 (e.g. isr_rx0_full_status6) is cleared, the corresponding bit in tx0_data will be cleaned automatically. |
15:0 |
RX0_DATA |
R |
0x0 |
Rx data automatically maps data from tx0_data of CPU0 |
REG_IPC_ISR
Name: Interrupt Empty Full Status Register
Size: 32
Address offset: 004h
Read/write access: R/W
This register is used to record Tx empty.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ISR_TX0_EMPTY_STATUS15 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
30 |
ISR_TX0_EMPTY_STATUS14 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
29 |
ISR_TX0_EMPTY_STATUS13 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
28 |
ISR_TX0_EMPTY_STATUS12 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
27 |
ISR_TX0_EMPTY_STATUS11 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
26 |
ISR_TX0_EMPTY_STATUS10 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
25 |
ISR_TX0_EMPTY_STATUS9 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
24 |
ISR_TX0_EMPTY_STATUS8 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
23 |
ISR_TX0_EMPTY_STATUS7 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
22 |
ISR_TX0_EMPTY_STATUS6 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
21 |
ISR_TX0_EMPTY_STATUS5 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
20 |
ISR_TX0_EMPTY_STATUS4 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
19 |
ISR_TX0_EMPTY_STATUS3 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
18 |
ISR_TX0_EMPTY_STATUS2 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
17 |
ISR_TX0_EMPTY_STATUS1 |
R/W |
0x0 |
Refer to the description of isr_tx0_empty_status0 |
16 |
ISR_TX0_EMPTY_STATUS0 |
R/W |
0x0 |
Tx channel 0 empty interrupt status of CPU1 transmit to CPU0. If the corresponding Rx full status bit in REG_ISR_CPU0 (e.g. isr_rx0_full_status0) is cleared, the corresponding Tx empty status bit will be set automatically. It will be cleared by software writing 1. |
15 |
ISR_RX0_FULL_STATUS15 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
14 |
ISR_RX0_FULL_STATUS14 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
13 |
ISR_RX0_FULL_STATUS13 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
12 |
ISR_RX0_FULL_STATUS12 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
11 |
ISR_RX0_FULL_STATUS11 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
10 |
ISR_RX0_FULL_STATUS10 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
9 |
ISR_RX0_FULL_STATUS9 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
8 |
ISR_RX0_FULL_STATUS8 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
7 |
ISR_RX0_FULL_STATUS7 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
6 |
ISR_RX0_FULL_STATUS6 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
5 |
ISR_RX0_FULL_STATUS5 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
4 |
ISR_RX0_FULL_STATUS4 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
3 |
ISR_RX0_FULL_STATUS3 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
2 |
ISR_RX0_FULL_STATUS2 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
1 |
ISR_RX0_FULL_STATUS1 |
R/W |
0x0 |
Refer to the description of isr_rx0_full_status0 |
0 |
ISR_RX0_FULL_STATUS0 |
R/W |
0x0 |
Rx channel 0 full interrupt status of CPU1. The corresponding Rx full status bit will be set by CPU0’s Tx data register (tx0_data) channel 0. It will be cleared by software writing 1. |
REG_IPC_IMR
Name: Interrupt Empty Full Mask Register
Size: 32
Address offset: 008h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
IMR_TX0_EMPTY_MASK |
R/W |
0x0 |
|
15:0 |
IMR_RX0_FULL_MASK |
R/W |
0x0 |
|
REG_IPC_ICR
Name: Clear Tx Register
Size: 32
Address offset: 00Ch
Read/write access: R/W
This register can ensure that the software can manually clear the Tx register in an emergency.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ICR_TX0_DATA_CLEAR15 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
30 |
ICR_TX0_DATA_CLEAR14 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
29 |
ICR_TX0_DATA_CLEAR13 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
28 |
ICR_TX0_DATA_CLEAR12 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
27 |
ICR_TX0_DATA_CLEAR11 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
26 |
ICR_TX0_DATA_CLEAR10 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
25 |
ICR_TX0_DATA_CLEAR9 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
24 |
ICR_TX0_DATA_CLEAR8 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
23 |
ICR_TX0_DATA_CLEAR7 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
22 |
ICR_TX0_DATA_CLEAR6 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
21 |
ICR_TX0_DATA_CLEAR5 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
20 |
ICR_TX0_DATA_CLEAR4 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
19 |
ICR_TX0_DATA_CLEAR3 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
18 |
ICR_TX0_DATA_CLEAR2 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
17 |
ICR_TX0_DATA_CLEAR1 |
R/W |
0x0 |
Refer to the description of icr_tx0_data_clear0 |
16 |
ICR_TX0_DATA_CLEAR0 |
R/W |
0x0 |
|
15:0 |
RSVD0 |
R/W |
0x0 |
REG_IPC_SEM_0
Size: 32
Address offset: 010h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_0_DATA |
R |
0x0 |
It is used to indicate whether this semaphore is occupied. 0: Not occupied; 1: Occupied. |
REG_IPC_SEM_1
Size: 32
Address offset: 014h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_1_DATA |
R |
0x0 |
It is used to indicate whether this semaphore is occupied. 0: Not occupied; 1: Occupied. |
REG_IPC_DUMMY
Name: Dummy Register
Size: 32
Address offset: 018h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:0 |
DUMMY |
R/W |
0x0 |
Dummy register |
Base Address:
IPC0_REG : 0x41020000
IPC1_REG : 0x41020080
IPC2_REG : 0x41020100
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Take LP’s IPC as an example to describe the function of IPC’s internal registers. The REG_TX_DATA is used to transmit message from LP to NP or AP. (The logic cannot be generated automatically) |
|
004h |
R |
The REG_RX_DATA is used to receive message from NP or AP. |
|
008h |
R/W |
This register is used to record Tx empty and Rx full status. |
|
00Ch |
R/W |
These bits mask their corresponding interrupt status bits. |
|
010h |
R/W |
This register can ensure that the software can manually clear the Tx register in an emergency. |
|
014h |
R/W |
||
018h |
R/W |
||
01Ch |
R/W |
||
020h |
R/W |
||
024h |
R/W |
REG_IPC_TX_DATA
Name: Tx Register
Size: 32
Address offset: 000h
Read/write access: R/W
Take LP’s IPC as an example to describe the function of IPC’s internal registers. The REG_TX_DATA is
used to transmit message from LP to NP or AP. (The logic cannot be generated automatically)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:8 |
TX0_DATA |
R/W |
0x0 |
After preparing descriptor, data and corresponding memory,
If the corresponding Rx full status bit in REG_ISR_CPU0 (eg. ISR_RX0_FULL_STATUS6) is cleared, the corresponding bit in tx0_data will be cleaned automatically. |
7:0 |
TX1_DATA |
R/W |
0x0 |
After preparing descriptor, data and corresponding memory,
If the corresponding Rx full status bit in REG_ISR_CPU1 (eg. ISR_RX1_FULL_STATUS6) is cleared, the corresponding bit in tx_data_ln will be cleaned automatically. |
REG_IPC_RX_DATA
Name: Rx Register
Size: 32
Address offset: 004h
Read/write access: R
The REG_RX_DATA is used to receive message from NP or AP.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:8 |
RX0_DATA |
R |
0x0 |
Rx data automatically maps data from TX0_DATA of CPU0 |
7:0 |
RX1_DATA |
R |
0x0 |
Rx data automatically maps data from TX1_DATA of CPU1 |
REG_IPC_ISR
Name: Interrupt Status Register
Size: 32
Address offset: 008h
Read/write access: R/W
This register is used to record Tx empty and Rx full status.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ISR_RX0_FULL_STATUS7 |
R/W |
0x0 |
Rx channel 7 full interrupt status of CPU3. The corresponding Rx full status bit will be set by CPU0’s Tx data register (tx0_data) channel 7. It will be cleared by software writing 1. |
30 |
ISR_RX0_FULL_STATUS6 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
29 |
ISR_RX0_FULL_STATUS5 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
28 |
ISR_RX0_FULL_STATUS4 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
27 |
ISR_RX0_FULL_STATUS3 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
26 |
ISR_RX0_FULL_STATUS2 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
25 |
ISR_RX0_FULL_STATUS1 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
24 |
ISR_RX0_FULL_STATUS0 |
R/W |
0x0 |
Refer to the description of the ISR_RX0_FULL_STATUS7. |
23 |
ISR_RX1_FULL_STATUS7 |
R/W |
0x0 |
Rx channel 7 full interrupt status of CPU3. The corresponding Rx full status bit will be set by CPU1’s Tx data register (tx1_data) channel 7. It will be cleared by software writing 1. |
22 |
ISR_RX1_FULL_STATUS6 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
21 |
ISR_RX1_FULL_STATUS5 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
20 |
ISR_RX1_FULL_STATUS4 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
19 |
ISR_RX1_FULL_STATUS3 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
18 |
ISR_RX1_FULL_STATUS2 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
17 |
ISR_RX1_FULL_STATUS1 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
16 |
ISR_RX1_FULL_STATUS0 |
R/W |
0x0 |
Refer to the description of the ISR_RX1_FULL_STATUS7. |
15 |
ISR_TX0_EMPTY_STATUS7 |
R/W |
0x0 |
Tx channel 7 empty interrupt status of CPU3 transmit to CPU0. If the corresponding Rx full status bit in REG_ISR_CPU0 (eg. ISR_RX0_FULL_STATUS7) is cleared, the corresponding Tx empty status bit will be set automatically. It will be cleared by software writing 1. |
14 |
ISR_TX0_EMPTY_STATUS6 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
13 |
ISR_TX0_EMPTY_STATUS5 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
12 |
ISR_TX0_EMPTY_STATUS4 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
11 |
ISR_TX0_EMPTY_STATUS3 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
10 |
ISR_TX0_EMPTY_STATUS2 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
9 |
ISR_TX0_EMPTY_STATUS1 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
8 |
ISR_TX0_EMPTY_STATUS0 |
R/W |
0x0 |
Refer to the description of the ISR_TX0_EMPTY_STATUS7. |
7 |
ISR_TX1_EMPTY_STATUS7 |
R/W |
0x0 |
Tx channel 7 empty interrupt status of CPU3 transmit to CPU1. If the corresponding Rx full status bit in REG_ISR_CPU1 (eg. ISR_RX1_FULL_STATUS7) is cleared, the corresponding Tx empty status bit will be set automatically. It will be cleared by software writing 1. |
6 |
ISR_TX1_EMPTY_STATUS6 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
5 |
ISR_TX1_EMPTY_STATUS5 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
4 |
ISR_TX1_EMPTY_STATUS4 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
3 |
ISR_TX1_EMPTY_STATUS3 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
2 |
ISR_TX1_EMPTY_STATUS2 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
1 |
ISR_TX1_EMPTY_STATUS1 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
0 |
ISR_TX1_EMPTY_STATUS0 |
R/W |
0x0 |
Refer to the description of the ISR_TX1_EMPTY_STATUS7. |
REG_IPC_IMR
Name: Interrupt Mask Register
Size: 32
Address offset: 00Ch
Read/write access: R/W
These bits mask their corresponding interrupt status bits.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:24 |
IMR_RX0_FULL_MASK |
R/W |
0x0 |
|
23:16 |
IMR_RX1_FULL_MASK |
R/W |
0x0 |
|
15:8 |
IMR_TX0_EMPTY_MASK |
R/W |
0x0 |
|
7:0 |
IMR_TX1_EMPTY_MASK |
R/W |
0x0 |
|
REG_IPC_ICR
Name: Clear Tx Register
Size: 32
Address offset: 010h
Read/write access: R/W
This register can ensure that the software can manually clear the Tx register in an emergency.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15 |
ICR_TX0_DATA_CLEAR7 |
R/W |
0x0 |
|
14 |
ICR_TX0_DATA_CLEAR6 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
13 |
ICR_TX0_DATA_CLEAR5 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
12 |
ICR_TX0_DATA_CLEAR4 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
11 |
ICR_TX0_DATA_CLEAR3 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
10 |
ICR_TX0_DATA_CLEAR2 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
9 |
ICR_TX0_DATA_CLEAR1 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
8 |
ICR_TX0_DATA_CLEAR0 |
R/W |
0x0 |
Refer to the description of the ICR_TX0_DATA_CLEAR7. |
7 |
ICR_TX1_DATA_CLEAR7 |
R/W |
0x0 |
|
6 |
ICR_TX1_DATA_CLEAR6 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
5 |
ICR_TX1_DATA_CLEAR5 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
4 |
ICR_TX1_DATA_CLEAR4 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
3 |
ICR_TX1_DATA_CLEAR3 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
2 |
ICR_TX1_DATA_CLEAR2 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
1 |
ICR_TX1_DATA_CLEAR1 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
0 |
ICR_TX1_DATA_CLEAR0 |
R/W |
0x0 |
Refer to the description of the ICR_TX1_DATA_CLEAR7. |
REG_IPC_SEM_x
Name: Semaphore x Register
Size: 32
Address offset: 014h + 04h * x (x=0, 1, 2, 3)
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11 |
SEMx_CLR |
R/W |
0x0 |
The bit can clear ‘CPUID ‘ & ‘PXID’ when owner CPU writes 1. |
10 |
SEMx_SET_CPUID |
R/W |
0x0 |
The bit can set CPUID, It must be written at the same time as SEMx_PXID. |
9:8 |
SEMx_CPUID |
R |
0x0 |
‘CPUID’ bit is a read-only bit.
|
7:0 |
SEMx_PXID |
R/W |
0x0 |
CPUID_PXID, which is used to indicate who owns this semaphore when the CPUID is the same. |
REG_IPC_DUMMY
Name: Dummy Register
Size: 32
Address offset: 024h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:0 |
DUMMY |
R/W |
0x0 |
Dummy register |
REGISTER_CONTENTS=RTL8720E
REGISTER_CONTENTS=RTL8720E
REGISTER_CONTENTS=RTL8720E
Base Address:
IPCAP_REG : 0x41000580
IPCLP_REG : 0x42008600
IPCNP_REG : 0x41000500
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Take LP’s IPC as an example to describe the function of IPC’s internal registers.The REG_TX_DATA is used to transmit message from LP to NP or AP. |
|
004h |
R |
The REG_RX_DATA is used to receive message from NP or AP. |
|
008h |
R/W |
This register is used to record Tx empty and Rx full status. |
|
00Ch |
R/W |
These bits mask their corresponding interrupt status bits. |
|
010h |
R/W |
This register can ensure that the software can manually clear the Tx register in an emergency. |
REG_IPC_TX_DATA
Name: Tx Register
Size: 32
Address offset: 000h
Read/write access: R/W
Take LP’s IPC as an example to describe the function of IPC’s internal registers.The REG_TX_DATA is
used to transmit message from LP to NP or AP.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:8 |
TX0_DATA |
R/W |
0x0 |
After preparing descriptor, data and corresponding memory,
If the corresponding Rx full status bit in REG_ISR_CPU0 (eg.isr_rx0_full_status6) is cleared, the corresponding bit in tx0_data will be cleaned automatically. |
7:0 |
TX1_DATA |
R/W |
0x0 |
After preparing descriptor, data and corresponding memory,
If the corresponding Rx full status bit in REG_ISR_CPU1 (eg.isr_rx1_full_status6) is cleared, the corresponding bit in tx_data_ln will be cleaned automatically. |
REG_IPC_RX_DATA
Name: Rx Register
Size: 32
Address offset: 004h
Read/write access: R
The REG_RX_DATA is used to receive message from NP or AP.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:8 |
RX0_DATA |
R |
0x0 |
Rx data automatically maps data from tx0_data of CPU0 |
7:0 |
RX1_DATA |
R |
0x0 |
Rx data automatically maps data from tx1_data of CPU1 |
REG_IPC_ISR
Name: Interrupt Status Register
Size: 32
Address offset: 008h
Read/write access: R/W
This register is used to record Tx empty and Rx full status.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ISR_RX0_FULL_STATUS7 |
R/W |
0x0 |
Rx channel 7 full interrupt status of CPU3. The corresponding Rx full status bit will be set by CPU0’s Tx data register (tx0_data) channel 7. It will be cleared by software writing 1. |
30 |
ISR_RX0_FULL_STATUS6 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
29 |
ISR_RX0_FULL_STATUS5 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
28 |
ISR_RX0_FULL_STATUS4 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
27 |
ISR_RX0_FULL_STATUS3 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
26 |
ISR_RX0_FULL_STATUS2 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
25 |
ISR_RX0_FULL_STATUS1 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
24 |
ISR_RX0_FULL_STATUS0 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status7. |
23 |
ISR_RX1_FULL_STATUS7 |
R/W |
0x0 |
Rx channel 7 full interrupt status of CPU3. The corresponding Rx full status bit will be set by CPU1’s Tx data register (tx1_data) channel 7. It will be cleared by software writing 1. |
22 |
ISR_RX1_FULL_STATUS6 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
21 |
ISR_RX1_FULL_STATUS5 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
20 |
ISR_RX1_FULL_STATUS4 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
19 |
ISR_RX1_FULL_STATUS3 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
18 |
ISR_RX1_FULL_STATUS2 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
17 |
ISR_RX1_FULL_STATUS1 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
16 |
ISR_RX1_FULL_STATUS0 |
R/W |
0x0 |
Refer to the description of the isr_rx1_full_status7. |
15 |
ISR_TX0_EMPTY_STATUS7 |
R/W |
0x0 |
Tx channel 7 empty interrupt status of CPU3 transmit to CPU0. If the corresponding Rx full status bit in REG_ISR_CPU0 (eg.isr_rx0_full_status7) is cleared, the corresponding Tx empty status bit will be set automatically. It will be cleared by software writing 1. |
14 |
ISR_TX0_EMPTY_STATUS6 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
13 |
ISR_TX0_EMPTY_STATUS5 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
12 |
ISR_TX0_EMPTY_STATUS4 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
11 |
ISR_TX0_EMPTY_STATUS3 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
10 |
ISR_TX0_EMPTY_STATUS2 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
9 |
ISR_TX0_EMPTY_STATUS1 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
8 |
ISR_TX0_EMPTY_STATUS0 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status7. |
7 |
ISR_TX1_EMPTY_STATUS7 |
R/W |
0x0 |
Tx channel 7 empty interrupt status of CPU3 transmit to CPU1. If the corresponding Rx full status bit in REG_ISR_CPU1 (eg.isr_rx1_full_status7) is cleared, the corresponding Tx empty status bit will be set automatically. It will be cleared by software writing 1. |
6 |
ISR_TX1_EMPTY_STATUS6 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
5 |
ISR_TX1_EMPTY_STATUS5 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
4 |
ISR_TX1_EMPTY_STATUS4 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
3 |
ISR_TX1_EMPTY_STATUS3 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
2 |
ISR_TX1_EMPTY_STATUS2 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
1 |
ISR_TX1_EMPTY_STATUS1 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
0 |
ISR_TX1_EMPTY_STATUS0 |
R/W |
0x0 |
Refer to the description of the isr_tx1_empty_status7. |
REG_IPC_IMR
Name: Interrupt Mask Register
Size: 32
Address offset: 00Ch
Read/write access: R/W
These bits mask their corresponding interrupt status bits.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:24 |
IMR_RX0_FULL_MASK |
R/W |
0x0 |
|
23:16 |
IMR_RX1_FULL_MASK |
R/W |
0x0 |
|
15:8 |
IMR_TX0_EMPTY_MASK |
R/W |
0x0 |
|
7:0 |
IMR_TX1_EMPTY_MASK |
R/W |
0x0 |
|
REG_IPC_ICR
Name: Clear Tx Register
Size: 32
Address offset: 010h
Read/write access: R/W
This register can ensure that the software can manually clear the Tx register in an emergency.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15 |
ICR_TX0_DATA_CLEAR7 |
R/W |
0x0 |
|
14 |
ICR_TX0_DATA_CLEAR6 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
13 |
ICR_TX0_DATA_CLEAR5 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
12 |
ICR_TX0_DATA_CLEAR4 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
11 |
ICR_TX0_DATA_CLEAR3 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
10 |
ICR_TX0_DATA_CLEAR2 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
9 |
ICR_TX0_DATA_CLEAR1 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
8 |
ICR_TX0_DATA_CLEAR0 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear7. |
7 |
ICR_TX1_DATA_CLEAR7 |
R/W |
0x0 |
|
6 |
ICR_TX1_DATA_CLEAR6 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
5 |
ICR_TX1_DATA_CLEAR5 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
4 |
ICR_TX1_DATA_CLEAR4 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
3 |
ICR_TX1_DATA_CLEAR3 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
2 |
ICR_TX1_DATA_CLEAR2 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
1 |
ICR_TX1_DATA_CLEAR1 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
0 |
ICR_TX1_DATA_CLEAR0 |
R/W |
0x0 |
Refer to the description of the icr_tx1_data_clear7. |
Base Address:
IPC0_REG : 0x40815000
IPC1_REG : 0x40815080
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Take LP’s IPC as an example to describe the function of IPC’s internal registers.The REG_TX_DATA is used to transmit message from LP to NP or AP. (The logic cannot be generated automatically) |
|
004h |
R/W |
This register is used to record Tx empty |
|
008h |
R/W |
||
00Ch |
R/W |
This register can ensure that the software can manually clear the Tx register in an emergency. |
|
020h |
R |
||
024h |
R |
||
028h |
R |
||
02Ch |
R |
||
030h |
R |
||
034h |
R |
||
038h |
R/W |
REG_IPC_DATA
Name: Tx_Rx Register
Size: 32
Address offset: 000h
Read/write access: R/W
Take LP’s IPC as an example to describe the function of IPC’s internal registers.The REG_TX_DATA is
used to transmit message from LP to NP or AP.
(The logic cannot be generated automatically)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
TX0_DATA |
R/W |
0x0 |
After preparing descriptor, data and corresponding memory,
If the corresponding Rx full status bit in REG_ISR_CPU0 (eg.isr_rx0_full_status6) is cleared, the corresponding bit in tx0_data will be cleaned automatically. |
15:0 |
RX0_DATA |
R |
0x0 |
Rx data automatically maps data from tx0_data of CPU0 |
REG_IPC_ISR
Name: Interrupt Empty Full Status Register
Size: 32
Address offset: 004h
Read/write access: R/W
This register is used to record Tx empty
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ISR_TX0_EMPTY_STATUS15 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
30 |
ISR_TX0_EMPTY_STATUS14 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
29 |
ISR_TX0_EMPTY_STATUS13 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
28 |
ISR_TX0_EMPTY_STATUS12 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
27 |
ISR_TX0_EMPTY_STATUS11 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
26 |
ISR_TX0_EMPTY_STATUS10 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
25 |
ISR_TX0_EMPTY_STATUS9 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
24 |
ISR_TX0_EMPTY_STATUS8 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
23 |
ISR_TX0_EMPTY_STATUS7 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
22 |
ISR_TX0_EMPTY_STATUS6 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
21 |
ISR_TX0_EMPTY_STATUS5 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
20 |
ISR_TX0_EMPTY_STATUS4 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
19 |
ISR_TX0_EMPTY_STATUS3 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
18 |
ISR_TX0_EMPTY_STATUS2 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
17 |
ISR_TX0_EMPTY_STATUS1 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_status0 |
16 |
ISR_TX0_EMPTY_STATUS0 |
R/W |
0x0 |
Tx channel 0 empty interrupt status of CPU1 transmit to CPU0. If the corresponding Rx full status bit in REG_ISR_CPU0 (eg.isr_rx0_full_status0) is cleared, the corresponding Tx empty status bit will be set automatically. It will be cleared by software writing 1. |
15 |
ISR_RX0_FULL_STATUS15 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
14 |
ISR_RX0_FULL_STATUS14 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
13 |
ISR_RX0_FULL_STATUS13 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
12 |
ISR_RX0_FULL_STATUS12 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
11 |
ISR_RX0_FULL_STATUS11 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
10 |
ISR_RX0_FULL_STATUS10 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
9 |
ISR_RX0_FULL_STATUS9 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
8 |
ISR_RX0_FULL_STATUS8 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
7 |
ISR_RX0_FULL_STATUS7 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
6 |
ISR_RX0_FULL_STATUS6 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
5 |
ISR_RX0_FULL_STATUS5 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
4 |
ISR_RX0_FULL_STATUS4 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
3 |
ISR_RX0_FULL_STATUS3 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
2 |
ISR_RX0_FULL_STATUS2 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
1 |
ISR_RX0_FULL_STATUS1 |
R/W |
0x0 |
Refer to the description of the isr_rx0_full_status0. |
0 |
ISR_RX0_FULL_STATUS0 |
R/W |
0x0 |
Rx channel 0 full interrupt status of CPU1. The corresponding Rx full status bit will be set by CPU0’s Tx data register (tx0_data) channel 0. It will be cleared by software writing 1. |
REG_IPC_IMR
Name: Interrupt Empty Full Mask Register
Size: 32
Address offset: 008h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
IMR_TX0_EMPTY_MASK |
R/W |
0x0 |
|
15:0 |
IMR_RX0_FULL_MASK |
R/W |
0x0 |
|
REG_IPC_ICR
Name: Clear Tx Register
Size: 32
Address offset: 00Ch
Read/write access: R/W
This register can ensure that the software can manually clear the Tx register in an emergency.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ICR_TX0_DATA_CLEAR15 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
30 |
ICR_TX0_DATA_CLEAR14 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
29 |
ICR_TX0_DATA_CLEAR13 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
28 |
ICR_TX0_DATA_CLEAR12 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
27 |
ICR_TX0_DATA_CLEAR11 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
26 |
ICR_TX0_DATA_CLEAR10 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
25 |
ICR_TX0_DATA_CLEAR9 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
24 |
ICR_TX0_DATA_CLEAR8 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
23 |
ICR_TX0_DATA_CLEAR7 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
22 |
ICR_TX0_DATA_CLEAR6 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
21 |
ICR_TX0_DATA_CLEAR5 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
20 |
ICR_TX0_DATA_CLEAR4 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
19 |
ICR_TX0_DATA_CLEAR3 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
18 |
ICR_TX0_DATA_CLEAR2 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
17 |
ICR_TX0_DATA_CLEAR1 |
R/W |
0x0 |
Refer to the description of the icr_tx0_data_clear0. |
16 |
ICR_TX0_DATA_CLEAR0 |
R/W |
0x0 |
|
15:0 |
RSVD0 |
R/W |
0x0 |
REG_IPC_SEM_0
Size: 32
Address offset: 020h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_0_DATA |
R |
0x0 |
It is used to indicate whether this semaphore is occupied. 0: Not occupied; 1: Occupied. |
REG_IPC_SEM_1
Size: 32
Address offset: 024h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_1_DATA |
R |
0x0 |
It is used to indicate whether this semaphore is occupied. 0: Not occupied; 1: Occupied. |
REG_IPC_SEM_CPUID0
Size: 32
Address offset: 028h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID0_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_SEM_CPUID1
Size: 32
Address offset: 02Ch
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID1_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_SEM_CPUID2
Size: 32
Address offset: 030h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID2_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_SEM_CPUID3
Size: 32
Address offset: 034h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID3_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_DUMMY
Size: 32
Address offset: 038h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:0 |
DUMMY |
R/W |
0x0 |
Dummy reg |
Base Address:
IPC0_REG : 0x40804000
IPC1_REG : 0x40805000
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
||
004h |
R/W |
||
008h |
R/W |
||
00Ch |
R/W |
||
010h |
R/W |
||
014h |
R/W |
||
018h |
R/W |
||
01Ch |
R/W |
||
020h |
R/W |
||
024h |
R/W |
||
028h |
R/W |
||
02Ch |
R/W |
||
030h |
R/W |
||
034h |
R/W |
||
038h |
R/W |
||
03Ch |
R/W |
||
040h |
R/W |
||
044h |
R/W |
||
048h |
R/W |
||
04Ch |
R/W |
||
050h |
R |
||
054h |
R |
||
058h |
R/W |
||
05Ch |
R/W |
||
060h |
R/W |
||
070h |
R |
||
074h |
R |
||
078h |
R |
||
07Ch |
R |
||
080h |
R |
||
084h |
R |
||
088h |
R/W |
REG_IPC_TX_DATA_CH0
Size: 32
Address offset: 000h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH0_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH1
Size: 32
Address offset: 004h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH1_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH2
Size: 32
Address offset: 008h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH2_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH3
Size: 32
Address offset: 00Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH3_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH4
Size: 32
Address offset: 010h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH4_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH5
Size: 32
Address offset: 014h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH5_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH6
Size: 32
Address offset: 018h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH6_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH7
Size: 32
Address offset: 01Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH7_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH8
Size: 32
Address offset: 020h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH8_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH9
Size: 32
Address offset: 024h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH9_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH10
Size: 32
Address offset: 028h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH10_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH11
Size: 32
Address offset: 02Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH11_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH12
Size: 32
Address offset: 030h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH12_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH13
Size: 32
Address offset: 034h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH13_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH14
Size: 32
Address offset: 038h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH14_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_DATA_CH15
Size: 32
Address offset: 03Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
TX0_CH15_DATA |
R/W |
0x0 |
Different data have their own dedicated channels for writing data, for example, IPC_TX_DATA_CH0 is the position for writing data to channel 0. |
REG_IPC_TX_CH_ST
Size: 32
Address offset: 040h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ICR_TX0_CH_ST15 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
30 |
ICR_TX0_CH_ST14 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
29 |
ICR_TX0_CH_ST13 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
28 |
ICR_TX0_CH_ST12 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
27 |
ICR_TX0_CH_ST11 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
26 |
ICR_TX0_CH_ST10 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
25 |
ICR_TX0_CH_ST9 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
24 |
ICR_TX0_CH_ST8 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
23 |
ICR_TX0_CH_ST7 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
22 |
ICR_TX0_CH_ST6 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
21 |
ICR_TX0_CH_ST5 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
20 |
ICR_TX0_CH_ST4 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
19 |
ICR_TX0_CH_ST3 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
18 |
ICR_TX0_CH_ST2 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
17 |
ICR_TX0_CH_ST1 |
R/W |
0x0 |
Refer to the description of the icr_tx0_ch_st0. |
16 |
ICR_TX0_CH_ST0 |
R/W |
0x0 |
|
15:0 |
TX0_CH_ST |
R/W |
0x0 |
Each bit represents the state of a channel.For example,when sw write all ch0 data, sw will pull 1. When cpu1 receives all ch0 data,it will be automatically cleared.
|
REG_IPC_ISR
Size: 32
Address offset: 044h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ISR_TX0_EMPTY_INT15 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
30 |
ISR_TX0_EMPTY_INT14 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
29 |
ISR_TX0_EMPTY_INT13 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
28 |
ISR_TX0_EMPTY_INT12 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
27 |
ISR_TX0_EMPTY_INT11 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
26 |
ISR_TX0_EMPTY_INT10 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
25 |
ISR_TX0_EMPTY_INT9 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
24 |
ISR_TX0_EMPTY_INT8 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
23 |
ISR_TX0_EMPTY_INT7 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
22 |
ISR_TX0_EMPTY_INT6 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
21 |
ISR_TX0_EMPTY_INT5 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
20 |
ISR_TX0_EMPTY_INT4 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
19 |
ISR_TX0_EMPTY_INT3 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
18 |
ISR_TX0_EMPTY_INT2 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
17 |
ISR_TX0_EMPTY_INT1 |
R/W |
0x0 |
Refer to the description of the isr_tx0_empty_int0 |
16 |
ISR_TX0_EMPTY_INT0 |
R/W |
0x0 |
When all the data in ch0 is read by cpu1,it will be set to 1 |
15 |
ISR_RX0_INT15 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
14 |
ISR_RX0_INT14 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
13 |
ISR_RX0_INT13 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
12 |
ISR_RX0_INT12 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
11 |
ISR_RX0_INT11 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
10 |
ISR_RX0_INT10 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
9 |
ISR_RX0_INT9 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
8 |
ISR_RX0_INT8 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
7 |
ISR_RX0_INT7 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
6 |
ISR_RX0_INT6 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
5 |
ISR_RX0_INT5 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
4 |
ISR_RX0_INT4 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
3 |
ISR_RX0_INT3 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
2 |
ISR_RX0_INT2 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
1 |
ISR_RX0_INT1 |
R/W |
0x0 |
Refer to the description of the isr_rx0_int0 |
0 |
ISR_RX0_INT0 |
R/W |
0x0 |
Fifo next pop chn0 data.when all the data in ch0 is read,it will be cleard |
REG_IPC_IMR
Size: 32
Address offset: 048h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
IMR_TX0_EMPTY |
R/W |
0x0 |
|
15:0 |
IMR_RX0 |
R/W |
0x0 |
Just useful when ipc_work_mode is 1.
|
REG_IPC_TX_ST
Size: 32
Address offset: 04Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
RSVD |
R |
- |
Reserved |
30:12 |
TX0_FIFO_TIMEOUT_TH |
R/W |
19’h9c40 |
If the number of data in the FIFO is below the threshold for a period longer than that set by this register, an interrupt will be triggered. |
11:7 |
TX0_FIFO_AF_LEVEL |
R/W |
5’h1 |
User define the full level for afifo.Interrupt will arise when the fifo data number reaches (FIFO_DEPTH - tx_fifio_af_level). The vaule must >=1. |
6 |
TX0_FIFO_CLR |
R/W |
0x0 |
Clear the FIFO data |
5 |
TX0_FIFO_WFULL |
R |
0x0 |
Fifo full state |
4:0 |
TX0_FIFO_WSPACE |
R |
0x0 |
The remaining writable space for the current fifo |
REG_IPC_RX_ST
Size: 32
Address offset: 050h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
RX0_FIFO_EMPTY |
R |
1’b1 |
When fifo is empty, rx0 _ch,rx0_data is invalid |
REG_IPC_RX_DATA
Size: 32
Address offset: 054h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
RX0_DATA |
R |
0x0 |
Fifo rdata |
REG_IPC_SW
Size: 32
Address offset: 058h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:0 |
RSVD_SW1 |
R/W |
0x0 |
Rsvd for sw |
REG_IPC_MODE
Size: 32
Address offset: 05Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
IPC_WORK_MODE |
R/W |
0x0 |
|
REG_IPC_TIM
Size: 32
Address offset: 060h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:9 |
RSVD |
R |
- |
Reserved |
8 |
APB_TIMEOUT_FLAG |
R/W |
0x0 |
If apb_rdy does not reply within a certain period of time, it will be pulled. |
7:0 |
APB_TIMEOUT_TH |
R/W |
8’h3f |
If apb_rdy does not reply within a certain period of time, it will automatically reply. The counting clock : ipc clk |
REG_IPC_SEM_0
Size: 32
Address offset: 070h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_0_DATA |
R |
0x0 |
It is used to indicate whether this semaphore is occupied. 0: Not occupied; 1: Occupied. |
REG_IPC_SEM_1
Size: 32
Address offset: 074h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_1_DATA |
R |
0x0 |
It is used to indicate whether this semaphore is occupied. 0: Not occupied; 1: Occupied. |
REG_IPC_SEM_CPUID0
Size: 32
Address offset: 078h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID0_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_SEM_CPUID1
Size: 32
Address offset: 07Ch
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID1_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_SEM_CPUID2
Size: 32
Address offset: 080h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID2_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_SEM_CPUID3
Size: 32
Address offset: 084h
Read/write access: R
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
SEM_CPUID3_DATA |
R |
0x0 |
It is used to indicate cpuid of this semaphore . |
REG_IPC_DUMMY
Size: 32
Address offset: 088h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:0 |
DUMMY |
R/W |
0x0 |
Dummy reg |