Registers
The abbreviations given in Column Access are explained in Section Access Types for Registers .
Base Address: 0x41011000
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
The basic configuration of ADC includes enable and operation mode. |
|
004h |
R/W |
This register is used to configure analog ADC input type. |
|
008h |
R/W |
||
00Ch |
R/W |
||
010h |
R/W |
||
014h |
R/W |
||
018h |
R/W |
||
01Ch |
R/W |
||
020h |
R/W |
||
024h |
R/W |
||
028h |
R/W |
||
02Ch |
R/W |
||
030h |
R/W |
||
034h |
R/W |
This is channel comparison criterion control register, which can be used to control every channel’s comparison criterion. There are 3 kinds of criterions. |
|
038h |
R |
This is the register about comparison status of every channel. |
|
03Ch |
R/W |
Software channel list 0, used to define the analog channels to own channel list. |
|
040h |
R/W |
Software channel list 1, refer to REG_ADC_CHSW_LIST_0. |
|
048h |
R/W |
This is the register about automatic switch channel function. |
|
04Ch |
R/W |
Software controls to trigger the channel switch. |
|
050h |
R |
This register records the last channel. |
|
054h |
R |
This register reflects the ADC FSM and FIFO status. |
|
058h |
R/W |
This register is used to enable or disable the different kinds of interrupts. |
|
05Ch |
R |
This register is used to record the different kinds of interrupt raw status (bypass the enable register’s control). |
|
060h |
R/W |
This register is used to record the different kinds of interrupt status. |
|
064h |
R/W |
This register is about the specific channel to trigger interrupts. |
|
068h |
R/W |
||
06Ch |
R/W |
This register is used to select the specific external timer source. |
|
070h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
074h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
078h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
07Ch |
R |
This register is used to store the channel data, ready and overwritten information. |
|
080h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
084h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
088h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
08Ch |
R |
This register is used to store the channel data, ready and overwritten information. |
|
090h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
094h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
098h |
R |
This register is used to store the channel data, ready and overwritten information. |
|
09Ch |
R |
This register is used to store global data, ready, channel and overwritten information. |
|
0A0h |
R |
This register is used to store FIFO entry number. |
|
0A4h |
R/W |
This register is used to clear FIFO. |
|
0A8h |
R/W |
This register is used to control clock dividend and channel unmask. |
|
0ACh |
R/W |
This register is used to configure ADC over sample. |
|
0B0h |
R/W |
This register is used to control the ADC power and debug configuration. |
|
0B4h |
R/W |
This register is used to set the software test mode. |
|
0B8h |
R/W |
REG_ADC_CONF
Name: ADC Configuration Register
Size: 32
Address offset: 000h
Read/write access: R/W
The basic configuration of ADC includes enable and operation mode.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_ENABLE |
R/W |
0h |
This bit is for ADC enable control |
8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_ADC_CVLIST_LEN |
R/W |
0h |
This field defines the number of items in the ADC conversion channel list. |
3:1 |
BIT_ADC_OP_MOD |
R/W |
0h |
These bits selects ADC operation mode.
|
0 |
RSVD |
R |
- |
Reserved |
REG_ADC_IN_TYPE
Name: ADC Input Type Register
Size: 32
Address offset: 004h
Read/write access: R/W
This register is used to configure analog ADC input type.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:11 |
RSVD |
R |
- |
Reserved |
10 |
BIT_ADC_IN_TYPE_CH10 |
R |
0 |
This bit reflects which kind of input type channel 10 is. Since channel 10 is a fixed internal channel. |
9 |
BIT_ADC_IN_TYPE_CH9 |
R |
0 |
This bit reflects which kind of input type channel 9 is. Since channel 9 is a fixed internal channel. |
8 |
BIT_ADC_IN_TYPE_CH8 |
R |
0 |
This bit reflects which kind of input type channel 8 is. Since channel 8 is a fixed internal channel. |
7 |
BIT_ADC_IN_TYPE_CH7 |
R |
0 |
This bit reflects which kind of input type channel 7 is. Since channel 7 is a fixed internal channel. |
6 |
BIT_ADC_IN_TYPE_CH6 |
R |
0 |
This bit reflects which kind of input type channel 6 is. Since channel 6 is a fixed single-end input channel. |
5 |
BIT_ADC_IN_TYPE_CH5 |
R/W |
0 |
This bit controls channel 5 input type. If it’s set to differential types (value of this bit is 1), channel 4 should also be set to differential type since they are hardware-fixed differential pair.
|
4 |
BIT_ADC_IN_TYPE_CH4 |
R/W |
0 |
This bit controls channel 4 input type. If it’s set to differential types (value of this bit is 1), channel 5 should also be set to differential type since they are hardware-fixed differential pair.
|
3 |
BIT_ADC_IN_TYPE_CH3 |
R/W |
0 |
This bit controls channel 3 input type. If it’s set to differential types (value of this bit is 1), channel 2 should also be set to differential type since they are hardware-fixed differential pair.
|
2 |
BIT_ADC_IN_TYPE_CH2 |
R/W |
0 |
This bit controls channel 2 input type. If it’s set to differential types (value of this bit is 1), channel 3 should also be set to differential type since they are hardware-fixed differential pair.
|
1 |
BIT_ADC_IN_TYPE_CH1 |
R/W |
0 |
This bit controls channel 1 input type. If it’s set to differential types (value of this bit is 1), channel 0 should also be set to differential type since they are hardware-fixed differential pair.
|
0 |
BIT_ADC_IN_TYPE_CH0 |
R/W |
0 |
This bit controls channel 0 input type. If it’s set to differential types (value of this bit is 1), channel 1 should also be set to differential type since they are hardware-fixed differential pair.
|
REG_ADC_COMP_TH_CHx
Name: ADC Channel x Comparison Threshold Register
Size: 32
Address offset: 008h + 04h * x (x=0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CHx |
R/W |
0h |
This field defines the higher threshold of channel x for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CHx |
R/W |
0h |
This field defines the lower threshold of channel x for ADC automatic comparison. |
REG_ADC_COMP_CTRL
Name: ADC Comparison Control Register
Size: 32
Address offset: 034h
Read/write access: R/W
This is channel comparison criterion control register, which can be used to control every channel’s
comparison criterion. There are 3 kinds of criterions.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21:20 |
BIT_ADC_COMP_CTRL_CH10 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
19:18 |
BIT_ADC_COMP_CTRL_CH9 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
17:16 |
BIT_ADC_COMP_CTRL_CH8 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
15:14 |
BIT_ADC_COMP_CTRL_CH7 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
13:12 |
BIT_ADC_COMP_CTRL_CH6 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
11:10 |
BIT_ADC_COMP_CTRL_CH5 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
9:8 |
BIT_ADC_COMP_CTRL_CH4 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
7:6 |
BIT_ADC_COMP_CTRL_CH3 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
5:4 |
BIT_ADC_COMP_CTRL_CH2 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
3:2 |
BIT_ADC_COMP_CTRL_CH1 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
1:0 |
BIT_ADC_COMP_CTRL_CH0 |
R/W |
0h |
The function is the same as BIT_ADC_COMP_CTRL_CH10. |
REG_ADC_COMP_STS
Name: ADC Comparison Status Register
Size: 32
Address offset: 038h
Read/write access: R
This is the register about comparison status of every channel.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21:20 |
BIT_ADC_COMP_STS_CH10 |
R |
0h |
This field reflects the comparison result of channel 10 immediately |
19:18 |
BIT_ADC_COMP_STS_CH9 |
R |
0h |
This field reflects the comparison result of channel 9 immediately |
17:16 |
BIT_ADC_COMP_STS_CH8 |
R |
0h |
This field reflects the comparison result of channel 8 immediately |
15:14 |
BIT_ADC_COMP_STS_CH7 |
R |
0h |
This field reflects the comparison result of channel 7 immediately |
13:12 |
BIT_ADC_COMP_STS_CH6 |
R |
0h |
This field reflects the comparison result of channel 6 immediately |
11:10 |
BIT_ADC_COMP_STS_CH5 |
R |
0h |
This field reflects the comparison result of channel 5 immediately |
9:8 |
BIT_ADC_COMP_STS_CH4 |
R |
0h |
This field reflects the comparison result of channel 4 immediately |
7:6 |
BIT_ADC_COMP_STS_CH3 |
R |
0h |
This field reflects the comparison result of channel 3 immediately |
5:4 |
BIT_ADC_COMP_STS_CH2 |
R |
0h |
This field reflects the comparison result of channel 2 immediately |
3:2 |
BIT_ADC_COMP_STS_CH1 |
R |
0h |
This field reflects the comparison result of channel 1 immediately |
1:0 |
BIT_ADC_COMP_STS_CH0 |
R |
0h |
This field reflects the comparison result of channel 0 immediately |
REG_ADC_CHSW_LIST_0
Name: ADC Channel Switch List 0 Register
Size: 32
Address offset: 03Ch
Read/write access: R/W
Software channel list 0, used to define the analog channels to own channel list.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_7 |
R/W |
0h |
This field defines the number 7 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_6 |
R/W |
0h |
This field defines the number 6 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_5 |
R/W |
0h |
This field defines the number 5 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_4 |
R/W |
0h |
This field defines the number 4 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_3 |
R/W |
0h |
This field defines the number 3 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_2 |
R/W |
0h |
This field defines the number 2 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_1 |
R/W |
0h |
This field defines the number 1 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_0 |
R/W |
0h |
This field defines the number 0 channel to do a conversion when a conversion event takes place. |
REG_ADC_CHSW_LIST_1
Name: ADC Channel Switch List 1 Register
Size: 32
Address offset: 040h
Read/write access: R/W
Software channel list 1, refer to REG_ADC_CHSW_LIST_0.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_15 |
R/W |
0h |
This field defines the number 15 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_14 |
R/W |
0h |
This field defines the number 14 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_13 |
R/W |
0h |
This field defines the number 13 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_12 |
R/W |
0h |
This field defines the number 12 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_11 |
R/W |
0h |
This field defines the number 11 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_10 |
R/W |
0h |
This field defines the number 10 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_9 |
R/W |
0h |
This field defines the number 9 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_8 |
R/W |
0h |
This field defines the number 8 channel to do a conversion when a conversion event takes place. |
REG_ADC_AUTO_CSW_CTRL
Name: ADC Automatic Channel Switch Control Register
Size: 32
Address offset: 048h
Read/write access: R/W
This is the register about automatic switch channel function.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_AUTOSW_EN |
R/W |
0h |
This bit controls the automatic channel switch enabled or disabled.
|
REG_ADC_SW_TRIG
Name: ADC Software Trigger Register
Size: 32
Address offset: 04Ch
Read/write access: R/W
Software controls to trigger the channel switch.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TRIG |
R/W |
0h |
This bit controls the ADC module to do a conversion. Every time this bit is set to 1, ADC module would switch to a new channel and do one conversion. Therefore, this bit could be used as a start-convert event which is controlled by software. Every time a conversion is done, software MUST clear this bit manually. The interval between clearing and restart this bit must exceed one sample clock period.
|
REG_ADC_LAST_CH
Name: ADC Last Channel Register
Size: 32
Address offset: 050h
Read/write access: R
This register records the last channel.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_LAST_CH |
R |
0h |
This field reflects the last used channel. |
REG_ADC_BUSY_STS
Name: ADC Busy Status Register
Size: 32
Address offset: 054h
Read/write access: R
This register reflects the ADC FSM and FIFO status.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2 |
BIT_ADC_FIFO_EMPTY |
R |
1 |
|
1 |
BIT_ADC_FIFO_FULL_REAL |
R |
0 |
|
0 |
BIT_ADC_BUSY_STS |
R |
0 |
This bit reflects the ADC is busy or not. If the ADC is processing a conversion of a channel, this bit remains 1 which indicates it’s busy. Once a conversion is done, this bit becomes 0 which indicates it’s ready to do another conversion.
|
REG_ADC_INTR_CTRL
Name: ADC Interrupt Control Register
Size: 32
Address offset: 058h
Read/write access: R/W
This register is used to enable or disable the different kinds of interrupts.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
BIT_ADC_IT_COMP_DET_MOD |
R/W |
0h |
This bit controls the interrupt bit_adc_it_comp_chx operation. Comparison criterion matching is rising edge.
|
30:19 |
RSVD |
R |
- |
Reserved |
18 |
BIT_ADC_IT_COMP_CH10_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
17 |
BIT_ADC_IT_COMP_CH9_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
16 |
BIT_ADC_IT_COMP_CH8_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
15 |
BIT_ADC_IT_COMP_CH7_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
14 |
BIT_ADC_IT_COMP_CH6_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
13 |
BIT_ADC_IT_COMP_CH5_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
12 |
BIT_ADC_IT_COMP_CH4_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
11 |
BIT_ADC_IT_COMP_CH3_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
10 |
BIT_ADC_IT_COMP_CH2_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
9 |
BIT_ADC_IT_COMP_CH1_EN |
R/W |
0h |
The function is the same as BIT_ADC_IT_COMP_CH0_EN |
8 |
BIT_ADC_IT_COMP_CH0_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 0 comparison criterion matches.
|
7 |
BIT_ADC_IT_ERR_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when an error state takes place.
|
6 |
BIT_ADC_IT_DAT_OVW_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a data overwritten situation takes place.
|
5 |
BIT_ADC_IT_FIFO_EMPTY_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO empty state takes place.
|
4 |
BIT_ADC_IT_FIFO_OVER_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO overflow state takes place.
|
3 |
BIT_ADC_IT_FIFO_FULL_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO full state takes place.
|
2 |
BIT_ADC_IT_CHCV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a particular channel conversion is done. refer to reg_adc_it_chno_con.
|
1 |
BIT_ADC_IT_CV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not every time a conversion is done. No matter ADC module is in what kind of operation mode. Every time a conversion is executed, ADC module would notify system if This bit is set.
|
0 |
BIT_ADC_IT_CVLIST_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a conversion of the last channel in the list is done. For example, in automatic mode conversions would be executed continuously. Every time the last channel conversion is done, which means all channel conversions in the list is done, ADC could notify system if This bit is set.
|
REG_ADC_INTR_RAW_STS
Name: ADC Interrupt Raw Status Register
Size: 32
Address offset: 05Ch
Read/write access: R
This register is used to record the different kinds of interrupt raw status (bypass the enable
register’s control).
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:19 |
RSVD |
R |
- |
Reserved |
18 |
BIT_ADC_IT_COMP_CH10_RAW_STS |
R |
0h |
|
17 |
BIT_ADC_IT_COMP_CH9_RAW_STS |
R |
0h |
Merged |
16 |
BIT_ADC_IT_COMP_CH8_RAW_STS |
R |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_RAW_STS |
R |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_RAW_STS |
R |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_RAW_STS |
R |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_RAW_STS |
R |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_RAW_STS |
R |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_RAW_STS |
R |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_RAW_STS |
R |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_RAW_STS |
R |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_RAW_STS |
R |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_RAW_STS |
R |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_RAW_STS |
R |
1h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_RAW_STS |
R |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_RAW_STS |
R |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_RAW_STS |
R |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_RAW_STS |
R |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_RAW_STS |
R |
0h |
Merged |
REG_ADC_INTR_STS
Name: ADC Interrupt Status Register
Size: 32
Address offset: 060h
Read/write access: R/W
This register is used to record the different kinds of interrupt status.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:19 |
RSVD |
R |
- |
Reserved |
18 |
BIT_ADC_IT_COMP_CH10_STS |
R/W |
0h |
|
17 |
BIT_ADC_IT_COMP_CH9_STS |
R/W |
0h |
Merged |
16 |
BIT_ADC_IT_COMP_CH8_STS |
R/W |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_STS |
R/W |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_STS |
R/W |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_STS |
R/W |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_STS |
R/W |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_STS |
R/W |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_STS |
R/W |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_STS |
R/W |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_STS |
R/W |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_STS |
R/W |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_STS |
R/W |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_STS |
R/W |
0h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_STS |
R/W |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_STS |
R/W |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_STS |
R/W |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_STS |
R/W |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_STS |
R/W |
0h |
Merged |
REG_ADC_IT_CHNO_CON
Name: ADC Interrupt Channel Number Configuration Register
Size: 32
Address offset: 064h
Read/write access: R/W
This register is about the specific channel to trigger interrupts.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_IT_CHNO_CON |
R/W |
0h |
This field defines that ADC module should send interrupt signal to system when a conversion which of channel number is the same as this field. This register is only valid when bit_adc_it_chcv_end_en is set. Bit_adc_it_chno_con: channel number |
REG_ADC_FULL_LVL
Name: ADC FIFO Full Threshold Register
Size: 32
Address offset: 068h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FULL_LVL |
R/W |
0h |
This field defines the FIFO full entry threshold level and it’s used for FIFO full interrupt. It should be set according to ADC FIFO depth. A value of 0 sets the threshold for 1 entry, and a value of 15 sets the threshold for 16 entries. |
REG_ADC_EXT_TRIG_TIMER_SEL
Name: ADC External Trigger Timer Select Register
Size: 32
Address offset: 06Ch
Read/write access: R/W
This register is used to select the specific external timer source.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_EXT_TRIG_TIMER_SEL |
R/W |
0h |
These three bits defines which timer channel would be used to make ADC module do a conversion.
|
REG_ADC_DATA_CHx
Name: ADC Channel x Data Register
Size: 32
Address offset: 070h + 04h * x (x=0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
Read/write access: R
This register is used to store the channel data, ready and overwritten information.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CHx |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_chx. |
20 |
BIT_ADC_DAT_OVW_CHx |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global taking place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_chx.
|
19:16 |
BIT_ADC_NUM_CHx |
R |
0 |
This field contains the newest conversion data of channel x [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CHx |
R |
0 |
This field contains the newest conversion data of channel x [15:0]: newest data |
REG_ADC_DATA_GLOBAL
Name: ADC Global Data Register
Size: 32
Address offset: 09Ch
Read/write access: R
This register is used to store global data, ready, channel and overwritten information.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_GLOBAL |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_global |
20 |
BIT_ADC_DAT_OVW_GLOBAL |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global taking place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field.
|
19:16 |
BIT_ADC_CH_NUM_GLOBAL |
R |
0 |
This field contains the newest conversion data of channel in the list. [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_GLOBAL |
R |
0 |
This field contains the newest conversion data of channel in the list. [15:0]: newest data |
REG_ADC_FLR
Name: ADC FIFO Level Register
Size: 32
Address offset: 0A0h
Read/write access: R
This register is used to store FIFO entry number.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FLR |
R |
0 |
This field records the current ADC FIFO entry number. |
REG_ADC_CLR_FIFO
Name: ADC Clear FIFO Register
Size: 32
Address offset: 0A4h
Read/write access: R/W
This register is used to clear FIFO.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_CLR_FIFO |
R/W |
0 |
This bit is used to clear FIFO contents and makes it to the default status. Every time this bit is set to 1. FIFO would be cleared to the default status. Software should set this bit to 0 after FIFO is cleared.
|
REG_ADC_CLK_DIV
Name: ADC Clock Divider Register
Size: 32
Address offset: 0A8h
Read/write access: R/W
This register is used to control clock dividend and channel unmask.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:15 |
BIT_ADC_DUMMY_CHN_SCNT |
R/W |
0h |
Dummy channel time counter. In auto mode, ADC shares the dummy channel for Cap-Touch. This register controls the time of dummy channel, the unit is 4MHz. |
14:8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_SETTLE_CTC_TO_ADC |
R/W |
0h |
Settle count for sample data from Cap-Touch to ADC, the unit is ADC sample clock.
|
3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_CLK_DIV |
R/W |
3h |
This field defines clock driver level of ADC module. The source clock is OSC4M. A value of 0 is for clock divided by 4. A value of 1 is for clock divided by 8. A value of 2 is for clock divided by 16. A value of 3 is for clock divided by 24. A value of 4 is for clock divided by 32. A value of 5 is for clock divided by 64. A value of 6 is for clock divided by 128. |
REG_ADC_OVERSAMPLE
Name: ADC Oversample Register
Size: 32
Address offset: 0ACh
Read/write access: R/W
This register is used to configure ADC over sample.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:9 |
RSVD |
R |
- |
Reserved |
8:6 |
BIT_ADC_OSF |
R/W |
0 |
Oversampling right shift
|
5:3 |
BIT_ADC_OSR |
R/W |
0 |
Oversample ratio
|
2 |
RSVD |
R |
- |
Reserved |
1 |
BIT_OV_MODE |
R/W |
0 |
Oversample mode
|
0 |
BIT_ADC_OS_EN |
R/W |
0 |
Oversample enable
|
REG_ADC_PWR_CTRL
Name: ADC Power Control Register
Size: 32
Address offset: 0B0h
Read/write access: R/W
This register is used to control the ADC power and debug configuration.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3 |
BIT_ADC_DBG_EN |
R/W |
0 |
Debug port enable |
2:1 |
BIT_ADC_DBG_SEL |
R/W |
0 |
Debug port select |
0 |
BIT_ADC_PWR_CTRL |
R/W |
0 |
This field is used to power control. |
REG_ADC_SW_TMODE
Name: ADC Software Test Mode
Size: 32
Address offset: 0B4h
Read/write access: R/W
This register is used to set the software test mode.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TMODE |
R/W |
0 |
This bit is used to change the high 4 bits in FIFO.
|
REG_ADC_DUMMY
Name: ADC Dummy Register
Size: 32
Address offset: 0B8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
DUMMY |
R/W |
ffffh |
Dummy register |
Base Address: 0x4101C000
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Basic configuration of ADC including enable and operation mode |
|
004h |
R/W |
Analog ADC input type configuration |
|
008h |
R/W |
Channel comparison threshold |
|
00Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
010h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
014h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
018h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
01Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
020h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
024h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
028h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
02Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
030h |
R/W |
This register can be used to control every channel’s comparison criterion. There are 3 kinds of criterions. |
|
034h |
R |
The comparison status of every channel |
|
038h |
R/W |
Software channel list 0, to define the analog channels to own channel list |
|
03Ch |
R/W |
Software channel list 1, refer to REG_ADC_CHSW_LIST_0 |
|
040h |
R/W |
Reset the channel list to default status |
|
044h |
R/W |
Automatic switch channel function |
|
048h |
R/W |
Software controls to trigger the channel switch |
|
04Ch |
R |
This register records the last channel |
|
050h |
R |
This register reflects the ADC FSM and fifo status |
|
054h |
R/W |
This register to enable or disable the different kinds of interrupts |
|
058h |
R |
This register to record the different kinds of interrupt raw status (bypass the enable register’s control) |
|
05Ch |
R/W |
This register to record the different kinds of interrupt status |
|
060h |
R/W |
The specific channel to trigger interrupt |
|
064h |
R/W |
The FIFO full threshold |
|
068h |
R/W |
This register is used to select the specific external timer source |
|
06Ch |
R |
This register is used to store the channel data , ready and overwritten information |
|
070h |
R |
Refer to REG_ADC_DATA_CH0 |
|
074h |
R |
Refer to REG_ADC_DATA_CH0 |
|
078h |
R |
Refer to REG_ADC_DATA_CH0 |
|
07Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
080h |
R |
Refer to REG_ADC_DATA_CH0 |
|
084h |
R |
Refer to REG_ADC_DATA_CH0 |
|
088h |
R |
Refer to REG_ADC_DATA_CH0 |
|
08Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
090h |
R |
Refer to REG_ADC_DATA_CH0 |
|
094h |
R |
This register is used to store global data, ready, channel and overwritten information. |
|
098h |
R |
This register is used to store fifo entry number. |
|
09Ch |
R/W |
This register is used to clear FIFO. |
|
0A0h |
R/W |
This register is used to control clock dividend. |
|
0A4h |
R/W |
This register is used to configure ADC delay and channel unmask. |
|
0A8h |
R/W |
This register is used to control the ADC power and debug configuration. |
|
0ACh |
R/W |
This register is used to set the software test mode. |
|
0B0h |
R/W |
Dummy register |
REG_ADC_CONF
Name: ADC Configuration Register
Size: 32
Address offset: 000h
Read/write access: R/W
Basic configuration of ADC including enable and operation mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_ENABLE |
R/W |
0h |
This bit is for ADC enable control |
8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_ADC_CVLIST_LEN |
R/W |
0h |
This field defines the number of items in the ADC conversion channel list. |
3:1 |
BIT_ADC_OP_MOD |
R/W |
0h |
These bits selects ADC operation mode.
|
0 |
BIT_ADC_REF_IN_SEL |
R/W |
0h |
This bit selects ADC reference voltage input.
|
REG_ADC_IN_TYPE
Name: ADC Input Type Register
Size: 32
Address offset: 004h
Read/write access: R/W
Analog ADC input type configuration
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_IN_TYPE_CH9 |
R |
0 |
This bit reflects which kind of input type channel 9 is. Since channel 9 is a fixed internal channel. |
8 |
BIT_ADC_IN_TYPE_CH8 |
R |
0 |
This bit reflects which kind of input type channel 8 is. Since channel 8 is a fixed internal channel. |
7 |
BIT_ADC_IN_TYPE_CH7 |
R |
0 |
This bit reflects which kind of input type channel 7 is. Since channel 7 is a fixed internal channel. |
6 |
BIT_ADC_IN_TYPE_CH6 |
R |
0 |
This bit reflects which kind of input type channel 6 is. Since channel 6 is a fixed internal channel. |
5 |
BIT_ADC_IN_TYPE_CH5 |
R/W |
0 |
This bit controls channel 5 input type. If it’s set to differential type(value of this bit is 1), channel 4 should also be set to differential type since they are hardware-fixed differential pair.
|
4 |
BIT_ADC_IN_TYPE_CH4 |
R/W |
0 |
This bit controls channel 4 input type. If it’s set to differential type(value of this bit is 1), channel 5 should also be set to differential type since they are hardware-fixed differential pair.
|
3 |
BIT_ADC_IN_TYPE_CH3 |
R/W |
0 |
This bit controls channel 3 input type. If it’s set to differential type(value of this bit is 1), channel 2 should also be set to differential type since they are hardware-fixed differential pair.
|
2 |
BIT_ADC_IN_TYPE_CH2 |
R/W |
0 |
This bit controls channel 2 input type. If it’s set to differential type(value of this bit is 1), channel 3 should also be set to differential type since they are hardware-fixed differential pair.
|
1 |
BIT_ADC_IN_TYPE_CH1 |
R/W |
0 |
This bit controls channel 1 input type. If it’s set to differential type(value of this bit is 1), channel 0 should also be set to differential type since they are hardware-fixed differential pair.
|
0 |
BIT_ADC_IN_TYPE_CH0 |
R/W |
0 |
This bit controls channel 0 input type. If it’s set to differential type(value of this bit is 1), channel 1 should also be set to differential type since they are hardware-fixed differential pair.
|
REG_ADC_COMP_TH_CHx
Name: ADC Channel x Comparison Threshold Register
Size: 32
Address offset: 008h + 04h * x (x=0, 1, 2, 3, 4, 5, 6, 7, 8, 9)
Read/write access: R/W
Channel comparison threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
RSVD |
R |
- |
Reserved |
27:16 |
BIT_ADC_COMP_TH_H_CHx |
R/W |
0h |
This field defines the higher threshold of channel x for ADC automatic comparison. |
15:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_COMP_TH_L_CHx |
R/W |
0h |
This field defines the lower threshold of channel x for ADC automatic comparison. |
REG_ADC_COMP_CTRL
Name: ADC Comparison Control Register
Size: 32
Address offset: 030h
Read/write access: R/W
This register can be used to control every channel’s comparison criterion. There are 3 kinds of
criterions.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:20 |
RSVD |
R |
- |
Reserved |
19:18 |
BIT_ADC_COMP_CTRL_CH9 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
17:16 |
BIT_ADC_COMP_CTRL_CH8 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
15:14 |
BIT_ADC_COMP_CTRL_CH7 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
13:12 |
BIT_ADC_COMP_CTRL_CH6 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
11:10 |
BIT_ADC_COMP_CTRL_CH5 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
9:8 |
BIT_ADC_COMP_CTRL_CH4 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
7:6 |
BIT_ADC_COMP_CTRL_CH3 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
5:4 |
BIT_ADC_COMP_CTRL_CH2 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
3:2 |
BIT_ADC_COMP_CTRL_CH1 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
1:0 |
BIT_ADC_COMP_CTRL_CH0 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
REG_ADC_COMP_STS
Name: ADC Comparison Status Register
Size: 32
Address offset: 034h
Read/write access: R
The comparison status of every channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:20 |
RSVD |
R |
- |
Reserved |
19:18 |
BIT_ADC_COMP_STS_CH9 |
R |
0h |
This field reflects the comparison result of channel 9 immediately. |
17:16 |
BIT_ADC_COMP_STS_CH8 |
R |
0h |
This field reflects the comparison result of channel 8 immediately. |
15:14 |
BIT_ADC_COMP_STS_CH7 |
R |
0h |
This field reflects the comparison result of channel 7 immediately. |
13:12 |
BIT_ADC_COMP_STS_CH6 |
R |
0h |
This field reflects the comparison result of channel 6 immediately. |
11:10 |
BIT_ADC_COMP_STS_CH5 |
R |
0h |
This field reflects the comparison result of channel 5 immediately. |
9:8 |
BIT_ADC_COMP_STS_CH4 |
R |
0h |
This field reflects the comparison result of channel 4 immediately. |
7:6 |
BIT_ADC_COMP_STS_CH3 |
R |
0h |
This field reflects the comparison result of channel 3 immediately. |
5:4 |
BIT_ADC_COMP_STS_CH2 |
R |
0h |
This field reflects the comparison result of channel 2 immediately. |
3:2 |
BIT_ADC_COMP_STS_CH1 |
R |
0h |
This field reflects the comparison result of channel 1 immediately. |
1:0 |
BIT_ADC_COMP_STS_CH0 |
R |
0h |
This field reflects the comparison result of channel 0 immediately. |
REG_ADC_CHSW_LIST_0
Name: ADC Channel Switch List 0 Register
Size: 32
Address offset: 038h
Read/write access: R/W
Software channel list 0, to define the analog channels to own channel list
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_7 |
R/W |
0h |
This field defines the number 7 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_6 |
R/W |
0h |
This field defines the number 6 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_5 |
R/W |
0h |
This field defines the number 5 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_4 |
R/W |
0h |
This field defines the number 4 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_3 |
R/W |
0h |
This field defines the number 3 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_2 |
R/W |
0h |
This field defines the number 2 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_1 |
R/W |
0h |
This field defines the number 1 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_0 |
R/W |
0h |
This field defines the number 0 channel to do a conversion when a conversion event takes place. |
REG_ADC_CHSW_LIST_1
Name: ADC Channel Switch List 1 Register
Size: 32
Address offset: 03Ch
Read/write access: R/W
Software channel list 1, refer to REG_ADC_CHSW_LIST_0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_15 |
R/W |
0h |
This field defines the number 15 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_14 |
R/W |
0h |
This field defines the number 14 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_13 |
R/W |
0h |
This field defines the number 13 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_12 |
R/W |
0h |
This field defines the number 12 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_11 |
R/W |
0h |
This field defines the number 11 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_10 |
R/W |
0h |
This field defines the number 10 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_9 |
R/W |
0h |
This field defines the number 9 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_8 |
R/W |
0h |
This field defines the number 8 channel to do a conversion when a conversion event takes place. |
REG_ADC_RST_LIST
Name: ADC Reset Channel List Register
Size: 32
Address offset: 040h
Read/write access: R/W
Reset the channel list to default status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_RST_LIST |
R/W |
0h |
This bit controls to reset the channel switch to default state or not. Once this bit is set, the auto/manual channel switch goes to the first channel as a default state.
|
REG_ADC_AUTO_CSW_CTRL
Name: ADC Automatic Channel Switch Control Register
Size: 32
Address offset: 044h
Read/write access: R/W
Automatic switch channel function
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_AUTO_CSW_EN |
R/W |
0h |
This bit controls the automatic channel switch enabled or disabled.
|
REG_ADC_SW_TRIG
Name: ADC Software Trigger Register
Size: 32
Address offset: 048h
Read/write access: R/W
Software controls to trigger the channel switch
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TRIG |
R/W |
0h |
This bit controls the ADC module to do a conversion. Every time this bit is set to 1, ADC module would switch to a new channel and do one conversion. Therefore, this bit could be used as a start-convert event which is controlled by software. Every time a conversion is done, software MUST clear this bit manually.
|
REG_ADC_LAST_CH
Name: ADC Last Channel Register
Size: 32
Address offset: 04Ch
Read/write access: R
This register records the last channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_LAST_CH |
R |
0h |
This field reflects the last used channel |
REG_ADC_BUSY_STS
Name: ADC Busy Status Register
Size: 32
Address offset: 050h
Read/write access: R
This register reflects the ADC FSM and fifo status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2 |
BIT_ADC_FIFO_EMPTY |
R |
1 |
|
1 |
BIT_ADC_FIFO_FULL_REAL |
R |
0 |
|
0 |
BIT_ADC_BUSY_STS |
R |
0 |
This bit reflects the ADC is busy or not. If the ADC is processing a conversion of a channel, this bit remains 1 which indicates it’s busy. Once a conversion is done, this bit becomes 0 which indicates it’s ready to do another conversion.
|
REG_ADC_INTR_CTRL
Name: ADC Interrupt Control Register
Size: 32
Address offset: 054h
Read/write access: R/W
This register to enable or disable the different kinds of interrupts
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:29 |
RSVD |
R |
- |
Reserved |
28 |
BIT_ADC_IT_COMPRE_CH9_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 9 comparison criterion matching is rising edge.
|
27 |
BIT_ADC_IT_COMPRE_CH8_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 8 comparison criterion matching is rising edge.
|
26 |
BIT_ADC_IT_COMPRE_CH7_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 7 comparison criterion matching is rising edge.
|
25 |
BIT_ADC_IT_COMPRE_CH6_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 6 comparison criterion matching is rising edge.
|
24 |
BIT_ADC_IT_COMPRE_CH5_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 5 comparison criterion matching is rising edge.
|
23 |
BIT_ADC_IT_COMPRE_CH4_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 4 comparison criterion matching is rising edge.
|
22 |
BIT_ADC_IT_COMPRE_CH3_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 3 comparison criterion matching is rising edge.
|
21 |
BIT_ADC_IT_COMPRE_CH2_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 2 comparison criterion matching is rising edge.
|
20 |
BIT_ADC_IT_COMPRE_CH1_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 1 comparison criterion matching is rising edge.
|
19 |
BIT_ADC_IT_COMPRE_CH0_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 0 comparison criterion matching is rising edge.
|
18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_IT_COMP_CH9_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 9 comparison criterion matches.
|
16 |
BIT_ADC_IT_COMP_CH8_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 8 comparison criterion matches.
|
15 |
BIT_ADC_IT_COMP_CH7_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 7 comparison criterion matches.
|
14 |
BIT_ADC_IT_COMP_CH6_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 6 comparison criterion matches.
|
13 |
BIT_ADC_IT_COMP_CH5_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 5 comparison criterion matches.
|
12 |
BIT_ADC_IT_COMP_CH4_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 4 comparison criterion matches.
|
11 |
BIT_ADC_IT_COMP_CH3_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 3 comparison criterion matches.
|
10 |
BIT_ADC_IT_COMP_CH2_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 2 comparison criterion matches.
|
9 |
BIT_ADC_IT_COMP_CH1_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 1 comparison criterion matches.
|
8 |
BIT_ADC_IT_COMP_CH0_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 0 comparison criterion matches.
|
7 |
BIT_ADC_IT_ERR_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when an error state takes place.
|
6 |
BIT_ADC_IT_DAT_OVW_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a data overwritten situation takes place.
|
5 |
BIT_ADC_IT_FIFO_EMPTY_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO empty state takes place.
|
4 |
BIT_ADC_IT_FIFO_OVER_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO overflow state takes place.
|
3 |
BIT_ADC_IT_FIFO_FULL_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO full state takes place.
|
2 |
BIT_ADC_IT_CHCV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a particular channel conversion is done. Please refer to reg_adc_it_chno_con
|
1 |
BIT_ADC_IT_CV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not every time a conversion is done. No matter ADC module is in what kind of operation mode. Every time a conversion is executed, ADC module would notify system if This bit is set.
|
0 |
BIT_ADC_IT_CVLIST_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a conversion of the last channel in the list is done. For example, in automatic mode conversions would be executed continuously. Every time the last channel conversion is done, which means all channel conversions in the list is done, ADC could notify system if This bit is set.
|
REG_ADC_INTR_RAW_STS
Name: ADC Interrupt Raw Status Register
Size: 32
Address offset: 058h
Read/write access: R
This register to record the different kinds of interrupt raw status (bypass the enable register’s
control)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:29 |
RSVD |
R |
- |
Reserved |
28 |
BIT_ADC_IT_COMPRE_CH9_RAW_STS |
R |
0h |
|
27 |
BIT_ADC_IT_COMPRE_CH8_RAW_STS |
R |
0h |
Merged |
26 |
BIT_ADC_IT_COMPRE_CH7_RAW_STS |
R |
0h |
Merged |
25 |
BIT_ADC_IT_COMPRE_CH6_RAW_STS |
R |
0h |
Merged |
24 |
BIT_ADC_IT_COMPRE_CH5_RAW_STS |
R |
0h |
Merged |
23 |
BIT_ADC_IT_COMPRE_CH4_RAW_STS |
R |
0h |
Merged |
22 |
BIT_ADC_IT_COMPRE_CH3_RAW_STS |
R |
0h |
Merged |
21 |
BIT_ADC_IT_COMPRE_CH2_RAW_STS |
R |
0h |
Merged |
20 |
BIT_ADC_IT_COMPRE_CH1_RAW_STS |
R |
0h |
Merged |
19 |
BIT_ADC_IT_COMPRE_CH0_RAW_STS |
R |
0h |
Merged |
18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_IT_COMP_CH9_RAW_STS |
R |
0h |
Merged |
16 |
BIT_ADC_IT_COMP_CH8_RAW_STS |
R |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_RAW_STS |
R |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_RAW_STS |
R |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_RAW_STS |
R |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_RAW_STS |
R |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_RAW_STS |
R |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_RAW_STS |
R |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_RAW_STS |
R |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_RAW_STS |
R |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_RAW_STS |
R |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_RAW_STS |
R |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_RAW_STS |
R |
1h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_RAW_STS |
R |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_RAW_STS |
R |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_RAW_STS |
R |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_RAW_STS |
R |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_RAW_STS |
R |
0h |
Merged |
REG_ADC_INTR_STS
Name: ADC Interrupt Status Register
Size: 32
Address offset: 05Ch
Read/write access: R/W
This register to record the different kinds of interrupt status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:29 |
RSVD |
R |
- |
Reserved |
28 |
BIT_ADC_IT_COMPRE_CH9_STS |
R/W |
0h |
|
27 |
BIT_ADC_IT_COMPRE_CH8_STS |
R/W |
0h |
Merged |
26 |
BIT_ADC_IT_COMPRE_CH7_STS |
R/W |
0h |
Merged |
25 |
BIT_ADC_IT_COMPRE_CH6_STS |
R/W |
0h |
Merged |
24 |
BIT_ADC_IT_COMPRE_CH5_STS |
R/W |
0h |
Merged |
23 |
BIT_ADC_IT_COMPRE_CH4_STS |
R/W |
0h |
Merged |
22 |
BIT_ADC_IT_COMPRE_CH3_STS |
R/W |
0h |
Merged |
21 |
BIT_ADC_IT_COMPRE_CH2_STS |
R/W |
0h |
Merged |
20 |
BIT_ADC_IT_COMPRE_CH1_STS |
R/W |
0h |
Merged |
19 |
BIT_ADC_IT_COMPRE_CH0_STS |
R/W |
0h |
Merged |
18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_IT_COMP_CH9_STS |
R/W |
0h |
Merged |
16 |
BIT_ADC_IT_COMP_CH8_STS |
R/W |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_STS |
R/W |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_STS |
R/W |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_STS |
R/W |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_STS |
R/W |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_STS |
R/W |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_STS |
R/W |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_STS |
R/W |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_STS |
R/W |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_STS |
R/W |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_STS |
R/W |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_STS |
R/W |
0h |
Merged |
4 |
BIT_ADC_FIFO_OVER_STS |
R/W |
0h |
Merged |
3 |
BIT_ADC_FIFO_FULL_STS |
R/W |
0h |
Merged |
2 |
BIT_ADC_CHCV_END_STS |
R/W |
0h |
Merged |
1 |
BIT_ADC_CV_END_STS |
R/W |
0h |
Merged |
0 |
BIT_ADC_CVLIST_END_STS |
R/W |
0h |
Merged |
REG_ADC_IT_CHNO_CON
Name: ADC Interrupt Channel Number Configuration Register
Size: 32
Address offset: 060h
Read/write access: R/W
The specific channel to trigger interrupt
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_IT_CHNO_CON |
R/W |
0h |
This field defines that ADC module should send interrupt signal to system when a conversion which of channel number is the same as this field. This register is only valid when bit_adc_it_chcv_end_en is set. Bit_adc_it_chno_con: channel number |
REG_ADC_FULL_LVL
Name: ADC FIFO Full Threshold Register
Size: 32
Address offset: 064h
Read/write access: R/W
The FIFO full threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FULL_LVL |
R/W |
0h |
This field defines the FIFO full entry thredshold level and it’s used for FIFO full interrupt. It should be set according to ADC FIFO depth. A value of 0 sets the threshold for 1 entry, and a value of 15 sets the threshold for 16 entries. |
REG_ADC_EXT_TRIG_TIMER_SEL
Name: ADC External Trigger Timer Select Register
Size: 32
Address offset: 068h
Read/write access: R/W
This register is used to select the specific external timer source
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_EXT_TRIG_TIMER_SEL |
R/W |
0h |
These three bits defines which timer channel would be used to make ADC module do a conversion.
|
REG_ADC_DATA_CHx
Name: ADC Channel x Data Register
Size: 32
Address offset: 06Ch + 04h * x (x=0, 1, 2, 3, 4, 5, 6, 7, 8, 9)
Read/write access: R
This register is used to store the channel data , ready and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_DAT_RDY_CHx |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_chx. |
16 |
BIT_ADC_DAT_OVW_CHx |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_chx taking place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_chx.
|
15:12 |
BIT_ADC_NUM_CHx |
R |
0 |
This field contains the newest conversion data of channel x [15:12]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
11:0 |
BIT_ADC_DATA_CHx |
R |
0 |
This field contains the newest conversion data of channel x [11:0]: newest data |
REG_ADC_DATA_GLOBAL
Name: ADC Global Data Register
Size: 32
Address offset: 094h
Read/write access: R
This register is used to store global data, ready, channel and overwritten information.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21:18 |
BIT_ADC_DAT_CH |
R |
0 |
This field indicates which channel data is procedd right now |
17 |
BIT_ADC_DAT_RDY_GLOBAL |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_global |
16 |
BIT_ADC_DAT_OVW_GLOBAL |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global taking place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field.
|
15:12 |
BIT_ADC_CH_NUM_GLOBAL |
R |
0 |
This field contains the newest conversion data of channel in the list. [15:12]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
11:0 |
BIT_ADC_DATA_GLOBAL |
R |
0 |
This field contains the newest conversion data of channel in the list. [11:0]: newest data |
REG_ADC_FLR
Name: ADC FIFO Level Register
Size: 32
Address offset: 098h
Read/write access: R
This register is used to store fifo entry number.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:5 |
RSVD |
R |
- |
Reserved |
4:0 |
BIT_ADC_FLR |
R |
0 |
This field records the current ADC FIFO entry number. |
REG_ADC_CLR_FIFO
Name: ADC Clear FIFO Register
Size: 32
Address offset: 09Ch
Read/write access: R/W
This register is used to clear FIFO.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_CLR_FIFO |
R/W |
0 |
This bit is used to clear FIFO contents and makes it to the default status. Every time this bit is set to 1. FIFO would be cleared to the default status. Software should set this bit to 0 after FIFO is cleared.
|
REG_ADC_CLK_DIV
Name: ADC Clock Divider Register
Size: 32
Address offset: 0A0h
Read/write access: R/W
This register is used to control clock dividend.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_CLK_DIV |
R/W |
3h |
This field defines clock driver level of ADC module. A value of 0 is for clock divided by 2. A value of 1 is for clock divided by 4. A value of 2 is for clock divided by 8. A value of 3 is for clock divided by 12. A value of 4 is for clock divided by 16. A value of 5 is for clock divided by 32. A value of 6 is for clock divided by 64. |
REG_ADC_DELAY_CNT
Name: ADC Delay Count Register
Size: 32
Address offset: 0A4h
Read/write access: R/W
This register is used to configure ADC delay and channel unmask.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
BIT_ADC_CH_UNMASK |
R/W |
0 |
Enable BIT_ADC_DAT_CHID |
30:10 |
RSVD |
R |
- |
Reserved |
9:8 |
BIT_ADC_CLK_SEL |
R/W |
0 |
Just config to 00 |
7:4 |
RSVD |
R |
- |
Reserved |
3:2 |
BIT_ADC_DELAY |
R/W |
0 |
This field defines channel switch data delay count. A value of 0 is for using default count of hardware. |
1:0 |
BIT_ADC_CTRL_DELAY |
R/W |
0 |
This field defines channel switch ctrl delay count. A value of 0 is for using default count of hardware. |
REG_ADC_PWR_CTRL
Name: ADC Power Control Register
Size: 32
Address offset: 0A8h
Read/write access: R/W
This register is used to control the ADC power and debug configuration.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3 |
BIT_ADC_DBG_EN |
R/W |
0 |
Debug port enable |
2:1 |
BIT_ADC_DBG_SEL |
R/W |
0 |
Debug port select |
0 |
BIT_ADC_PWR_CTRL |
R/W |
0 |
This field is used to power control |
REG_ADC_SW_TMODE
Name: ADC Software Test Mode
Size: 32
Address offset: 0ACh
Read/write access: R/W
This register is used to set the software test mode.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TMODE |
R/W |
0 |
This bit is used to change the high 4 bits in FIFO.
|
REG_ADC_DUMMY
Name: ADC Dummy Register
Size: 32
Address offset: 0B0h
Read/write access: R/W
Dummy register
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
DUMMY |
R/W |
ffffh |
Dummy register |
REGISTER_CONTENTS=RTL8720E
REGISTER_CONTENTS=RTL8720E
REGISTER_CONTENTS=RTL8720E
Base Address: 0x42012000
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Basic configuration of ADC including enable and operation mode |
|
004h |
R/W |
Analog ADC input type configuration |
|
008h |
R/W |
Channel comparison threshold |
|
00Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
010h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
014h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
018h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
01Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
020h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
024h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
028h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
02Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
030h |
R/W |
Channel comparison criterion control register, can be used to control every channel’s comparison criterion. There are 3 kinds of criterions. |
|
034h |
R |
The comparison status of every channel |
|
038h |
R/W |
Software channel list 0, to define the analog channels to own channel list |
|
03Ch |
R/W |
Software channel list 1, refer to REG_ADC_CHSW_LIST_0 |
|
040h |
R/W |
Reset the channel list to default status |
|
044h |
R/W |
Automatic switch channel function |
|
048h |
R/W |
Software controls to trigger the channel switch |
|
04Ch |
R |
The register records the last channel |
|
050h |
R |
The register reflects the ADC FSM and fifo status |
|
054h |
R/W |
The register to enable or disable the different kinds of interrupts |
|
058h |
R |
The register to record the different kinds of interrupt raw status (bypass the enable register’s control) |
|
05Ch |
R/W |
The register to record the different kinds of interrupt status |
|
060h |
R/W |
The specific channel to trigger interrupt |
|
064h |
R/W |
The fifo full threshold |
|
068h |
R/W |
The register to select the specific external timer source |
|
06Ch |
R |
The register to store the channel data, ready and overwritten information |
|
070h |
R |
Refer to REG_ADC_DATA_CH0 |
|
074h |
R |
Refer to REG_ADC_DATA_CH0 |
|
078h |
R |
Refer to REG_ADC_DATA_CH0 |
|
07Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
080h |
R |
Refer to REG_ADC_DATA_CH0 |
|
084h |
R |
Refer to REG_ADC_DATA_CH0 |
|
088h |
R |
Refer to REG_ADC_DATA_CH0 |
|
08Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
090h |
R |
Refer to REG_ADC_DATA_CH0 |
|
094h |
R |
The register to store global data, ready, channel and overwritten information |
|
098h |
R |
The register to store fifo entry number |
|
09Ch |
R/W |
The register to clear fifo |
|
0A0h |
R/W |
The register to control clock dividend |
|
0A4h |
R/W |
The register to configure ADC delay and channel unmask |
|
0A8h |
R/W |
The register to control the ADC power and debug configuration |
|
0ACh |
R/W |
The register to set the software test mode |
REG_ADC_CONF
Name: ADC Configuration Register
Size: 32
Address offset: 000h
Read/write access: R/W
Basic configuration of ADC including enable and operation mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_ENABLE |
R/W |
0h |
This bit is for ADC enable control |
8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_ADC_CVLIST_LEN |
R/W |
0h |
This field defines the number of items in the ADC conversion channel list. |
3:1 |
BIT_ADC_OP_MOD |
R/W |
0h |
These bits selects ADC operation mode. 0: software trigger mode.
|
0 |
BIT_ADC_REF_IN_SEL |
R/W |
0h |
This bit selects ADC reference voltage input.
|
REG_ADC_IN_TYPE
Name: ADC Input Type Register
Size: 32
Address offset: 004h
Read/write access: R/W
Analog ADC input type configuration
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_IN_TYPE_CH9 |
R |
0 |
This bit reflects which kind of input type channel 9 is. Since channel 9 is a fixed internal channel. |
8 |
BIT_ADC_IN_TYPE_CH8 |
R |
0 |
This bit reflects which kind of input type channel 8 is. Since channel 8 is a fixed internal channel. |
7 |
BIT_ADC_IN_TYPE_CH7 |
R |
0 |
This bit reflects which kind of input type channel 7 is. Since channel 7 is a fixed internal channel. |
6 |
BIT_ADC_IN_TYPE_CH6 |
R |
0 |
This bit reflects which kind of input type channel 6 is. Since channel 6 is a fixed internal channel. |
5 |
BIT_ADC_IN_TYPE_CH5 |
R/W |
0 |
This bit controls channel 5 input type. If it’s set to differential type(value of this bit is 1), channel 4 should also be set to differential type since they are hardware-fixed differential pair.
|
4 |
BIT_ADC_IN_TYPE_CH4 |
R/W |
0 |
This bit controls channel 4 input type. If it’s set to differential type(value of this bit is 1), channel 5 should also be set to differential type since they are hardware-fixed differential pair.
|
3 |
BIT_ADC_IN_TYPE_CH3 |
R/W |
0 |
This bit controls channel 3 input type. If it’s set to differential type(value of this bit is 1), channel 2 should also be set to differential type since they are hardware-fixed differential pair.
|
2 |
BIT_ADC_IN_TYPE_CH2 |
R/W |
0 |
This bit controls channel 2 input type. If it’s set to differential type(value of this bit is 1), channel 3 should also be set to differential type since they are hardware-fixed differential pair.
|
1 |
BIT_ADC_IN_TYPE_CH1 |
R/W |
0 |
This bit controls channel 1 input type. If it’s set to differential type(value of this bit is 1), channel 0 should also be set to differential type since they are hardware-fixed differential pair.
|
0 |
BIT_ADC_IN_TYPE_CH0 |
R/W |
0 |
This bit controls channel 0 input type. If it’s set to differential type(value of this bit is 1), channel 1 should also be set to differential type since they are hardware-fixed differential pair.
|
REG_ADC_COMP_TH_CHx
Name: ADC Channel x Comparison Threshold Register
Size: 32
Address offset: 008h + 04h * x (x=0, 1, 2, 3, 4, 5, 6, 7, 8, 9)
Read/write access: R/W
Channel comparison threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
RSVD |
R |
- |
Reserved |
27:16 |
BIT_ADC_COMP_TH_H_CHx |
R/W |
0h |
This field defines the higher threshold of channel x for ADC automatic comparison. |
15:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_COMP_TH_L_CHx |
R/W |
0h |
This field defines the lower threshold of channel x for ADC automatic comparison. |
REG_ADC_COMP_CTRL
Name: ADC Comparison Control Register
Size: 32
Address offset: 030h
Read/write access: R/W
Channel comparison criterion control register, can be used to control every channel’s comparison
criterion. There are 3 kinds of criterions.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:20 |
RSVD |
R |
- |
Reserved |
19:18 |
BIT_ADC_COMP_CTRL_CH9 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
17:16 |
BIT_ADC_COMP_CTRL_CH8 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
15:14 |
BIT_ADC_COMP_CTRL_CH7 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
13:12 |
BIT_ADC_COMP_CTRL_CH6 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
11:10 |
BIT_ADC_COMP_CTRL_CH5 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
9:8 |
BIT_ADC_COMP_CTRL_CH4 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
7:6 |
BIT_ADC_COMP_CTRL_CH3 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
5:4 |
BIT_ADC_COMP_CTRL_CH2 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
3:2 |
BIT_ADC_COMP_CTRL_CH1 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
1:0 |
BIT_ADC_COMP_CTRL_CH0 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
REG_ADC_COMP_STS
Name: ADC Comparison Status Register
Size: 32
Address offset: 034h
Read/write access: R
The comparison status of every channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:20 |
RSVD |
R |
- |
Reserved |
19:18 |
BIT_ADC_COMP_STS_CH9 |
R |
0h |
This field reflects the comparison result of channel 9 immediately |
17:16 |
BIT_ADC_COMP_STS_CH8 |
R |
0h |
This field reflects the comparison result of channel 8 immediately |
15:14 |
BIT_ADC_COMP_STS_CH7 |
R |
0h |
This field reflects the comparison result of channel 7 immediately |
13:12 |
BIT_ADC_COMP_STS_CH6 |
R |
0h |
This field reflects the comparison result of channel 6 immediately |
11:10 |
BIT_ADC_COMP_STS_CH5 |
R |
0h |
This field reflects the comparison result of channel 5 immediately |
9:8 |
BIT_ADC_COMP_STS_CH4 |
R |
0h |
This field reflects the comparison result of channel 4 immediately |
7:6 |
BIT_ADC_COMP_STS_CH3 |
R |
0h |
This field reflects the comparison result of channel 3 immediately |
5:4 |
BIT_ADC_COMP_STS_CH2 |
R |
0h |
This field reflects the comparison result of channel 2 immediately |
3:2 |
BIT_ADC_COMP_STS_CH1 |
R |
0h |
This field reflects the comparison result of channel 1 immediately |
1:0 |
BIT_ADC_COMP_STS_CH0 |
R |
0h |
This field reflects the comparison result of channel 0 immediately |
REG_ADC_CHSW_LIST_0
Name: ADC Channel Switch List 0 Register
Size: 32
Address offset: 038h
Read/write access: R/W
Software channel list 0, to define the analog channels to own channel list
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_7 |
R/W |
0h |
This field defines the number 7 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_6 |
R/W |
0h |
This field defines the number 6 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_5 |
R/W |
0h |
This field defines the number 5 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_4 |
R/W |
0h |
This field defines the number 4 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_3 |
R/W |
0h |
This field defines the number 3 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_2 |
R/W |
0h |
This field defines the number 2 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_1 |
R/W |
0h |
This field defines the number 1 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_0 |
R/W |
0h |
This field defines the number 0 channel to do a conversion when a conversion event takes place. |
REG_ADC_CHSW_LIST_1
Name: ADC Channel Switch List 1 Register
Size: 32
Address offset: 03Ch
Read/write access: R/W
Software channel list 1, refer to REG_ADC_CHSW_LIST_0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_15 |
R/W |
0h |
This field defines the number 15 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_14 |
R/W |
0h |
This field defines the number 14 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_13 |
R/W |
0h |
This field defines the number 13 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_12 |
R/W |
0h |
This field defines the number 12 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_11 |
R/W |
0h |
This field defines the number 11 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_10 |
R/W |
0h |
This field defines the number 10 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_9 |
R/W |
0h |
This field defines the number 9 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_8 |
R/W |
0h |
This field defines the number 8 channel to do a conversion when a conversion event takes place. |
REG_ADC_RST_LIST
Name: ADC Reset Channel List Register
Size: 32
Address offset: 040h
Read/write access: R/W
Reset the channel list to default status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_RST_LIST |
R/W |
0h |
This bit controls to reset the channel switch to default state or not. Once this bit is set, the auto/manual channel switch goes to the first channel as a default state.
|
REG_ADC_AUTO_CSW_CTRL
Name: ADC Automatic Channel Switch Control Register
Size: 32
Address offset: 044h
Read/write access: R/W
Automatic switch channel function
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_AUTO_CSW_EN |
R/W |
0h |
This bit controls the automatic channel switch enabled or disabled.
|
REG_ADC_SW_TRIG
Name: ADC Software Trigger Register
Size: 32
Address offset: 048h
Read/write access: R/W
Software controls to trigger the channel switch
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TRIG |
R/W |
0h |
This bit controls the ADC module to do a conversion. Every time this bit is set to 1, ADC module would switch to a new channel and do one conversion. Therefore, this bit could be used as a start-convert event which is controlled by software. Every time a conversion is done, software MUST clear this bit manually. The interval between clearing and restart this bit must exceed one sample clock period.
|
REG_ADC_LAST_CH
Name: ADC Last Channel Register
Size: 32
Address offset: 04Ch
Read/write access: R
The register records the last channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_LAST_CH |
R |
0h |
This field reflects the last used channel |
REG_ADC_BUSY_STS
Name: ADC Busy Status Register
Size: 32
Address offset: 050h
Read/write access: R
The register reflects the ADC FSM and fifo status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2 |
BIT_ADC_FIFO_EMPTY |
R |
1 |
|
1 |
BIT_ADC_FIFO_FULL_REAL |
R |
0 |
|
0 |
BIT_ADC_BUSY_STS |
R |
0 |
This bit reflects the ADC is busy or not. If the ADC is processing a conversion of a channel, this bit remains 1 which indicates it’s busy. Once a conversion is done, this bit becomes 0 which indicates it’s ready to do another conversion.
|
REG_ADC_INTR_CTRL
Name: ADC Interrupt Control Register
Size: 32
Address offset: 054h
Read/write access: R/W
The register to enable or disable the different kinds of interrupts
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_IT_COMP_CH9_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 9 comparison criterion matches.
|
16 |
BIT_ADC_IT_COMP_CH8_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 8 comparison criterion matches.
|
15 |
BIT_ADC_IT_COMP_CH7_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 7 comparison criterion matches.
|
14 |
BIT_ADC_IT_COMP_CH6_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 6 comparison criterion matches.
|
13 |
BIT_ADC_IT_COMP_CH5_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 5 comparison criterion matches.
|
12 |
BIT_ADC_IT_COMP_CH4_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 4 comparison criterion matches.
|
11 |
BIT_ADC_IT_COMP_CH3_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 3 comparison criterion matches.
|
10 |
BIT_ADC_IT_COMP_CH2_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 2 comparison criterion matches.
|
9 |
BIT_ADC_IT_COMP_CH1_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 1 comparison criterion matches.
|
8 |
BIT_ADC_IT_COMP_CH0_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 0 comparison criterion matches.
|
7 |
BIT_ADC_IT_ERR_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when an error state takes place.
|
6 |
BIT_ADC_IT_DAT_OVW_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a data overwritten situation takes place.
|
5 |
BIT_ADC_IT_FIFO_EMPTY_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO empty state takes place.
|
4 |
BIT_ADC_IT_FIFO_OVER_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO overflow state takes place.
|
3 |
BIT_ADC_IT_FIFO_FULL_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO full state takes place.
|
2 |
BIT_ADC_IT_CHCV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a particular channel conversion is done. Please refer to reg_adc_it_chno_con
|
1 |
BIT_ADC_IT_CV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not every time a conversion is done. No matter ADC module is in what kind of operation mode. Every time a conversion is executed, ADC module would notify system if This bit is set.
|
0 |
BIT_ADC_IT_CVLIST_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a conversion of the last channel in the list is done. For example, in automatic mode conversions would be executed continuously. Every time the last channel conversion is done, which means all channel conversions in the list is done, ADC could notify system if This bit is set.
|
REG_ADC_INTR_RAW_STS
Name: ADC Interrupt Raw Status Register
Size: 32
Address offset: 058h
Read/write access: R
The register to record the different kinds of interrupt raw status (bypass the enable register’s
control)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_IT_COMP_CH9_RAW_STS |
R |
0h |
|
16 |
BIT_ADC_IT_COMP_CH8_RAW_STS |
R |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_RAW_STS |
R |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_RAW_STS |
R |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_RAW_STS |
R |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_RAW_STS |
R |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_RAW_STS |
R |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_RAW_STS |
R |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_RAW_STS |
R |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_RAW_STS |
R |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_RAW_STS |
R |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_RAW_STS |
R |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_RAW_STS |
R |
1h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_RAW_STS |
R |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_RAW_STS |
R |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_RAW_STS |
R |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_RAW_STS |
R |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_RAW_STS |
R |
0h |
Merged |
REG_ADC_INTR_STS
Name: ADC Interrupt Status Register
Size: 32
Address offset: 05Ch
Read/write access: R/W
The register to record the different kinds of interrupt status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_IT_COMP_CH9_STS |
R/W |
0h |
|
16 |
BIT_ADC_IT_COMP_CH8_STS |
R/W |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_STS |
R/W |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_STS |
R/W |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_STS |
R/W |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_STS |
R/W |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_STS |
R/W |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_STS |
R/W |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_STS |
R/W |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_STS |
R/W |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_STS |
R/W |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_STS |
R/W |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_STS |
R/W |
0h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_STS |
R/W |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_STS |
R/W |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_STS |
R/W |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_STS |
R/W |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_STS |
R/W |
0h |
Merged |
REG_ADC_IT_CHNO_CON
Name: ADC Interrupt Channel Number Configuration Register
Size: 32
Address offset: 060h
Read/write access: R/W
The specific channel to trigger interrupt
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_IT_CHNO_CON |
R/W |
0h |
This field defines that ADC module should send interrupt signal to system when a conversion which of channel number is the same as this field. This register is only valid when bit_adc_it_chcv_end_en is set. Bit_adc_it_chno_con: channel number |
REG_ADC_FULL_LVL
Name: ADC FIFO Full Threshold Register
Size: 32
Address offset: 064h
Read/write access: R/W
The fifo full threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FULL_LVL |
R/W |
0h |
This field defines the FIFO full entry thredshold level and it’s used for FIFO full interrupt. It should be set according to ADC FIFO depth. A value of 0 sets the threshold for 1 entry, and a value of 15 sets the threshold for 16 entries. |
REG_ADC_EXT_TRIG_TIMER_SEL
Name: ADC External Trigger Timer Select Register
Size: 32
Address offset: 068h
Read/write access: R/W
The register to select the specific external timer source
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_EXT_TRIG_TIMER_SEL |
R/W |
0h |
These three bits defines which timer channel would be used to make ADC module do a conversion.
|
REG_ADC_DATA_CHx
Name: ADC Channel x Data Register
Size: 32
Address offset: 06Ch + 04h * x (x=0, 1, 2, 3, 4, 5, 6, 7, 8, 9)
Read/write access: R
The register to store the channel data, ready and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
BIT_ADC_DAT_RDY_CHx |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_chx. |
16 |
BIT_ADC_DAT_OVW_CHx |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_chx.
|
15:12 |
BIT_ADC_NUM_CHx |
R |
0 |
This field contains the newsest conversion data of channel x [15:12]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
11:0 |
BIT_ADC_DATA_CHx |
R |
0 |
This field contains the newsest conversion data of channel x [11:0]: newest data |
REG_ADC_DATA_GLOBAL
Name: ADC Global Data Register
Size: 32
Address offset: 094h
Read/write access: R
The register to store global data, ready, channel and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21:18 |
BIT_ADC_DAT_CH |
R |
0 |
This field indicates which channel data is procedd right now |
17 |
BIT_ADC_DAT_RDY_GLOBAL |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_global |
16 |
BIT_ADC_DAT_OVW_GLOBAL |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takes place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field.
|
15:12 |
BIT_ADC_CH_NUM_GLOBAL |
R |
0 |
This field contains the newsest conversion data of channel in the list. [15:12]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
11:0 |
BIT_ADC_DATA_GLOBAL |
R |
0 |
This field contains the newsest conversion data of channel in the list. [11:0]: newest data |
REG_ADC_FLR
Name: ADC FIFO Level Register
Size: 32
Address offset: 098h
Read/write access: R
The register to store fifo entry number
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:5 |
RSVD |
R |
- |
Reserved |
4:0 |
BIT_ADC_FLR |
R |
0 |
This field records the current ADC FIFO entry number. |
REG_ADC_CLR_FIFO
Name: ADC Clear FIFO Register
Size: 32
Address offset: 09Ch
Read/write access: R/W
The register to clear fifo
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_CLR_FIFO |
R/W |
0 |
This bit is used to clear FIFO contents and makes it to the default status. Every time this bit is set to 1. FIFO would be cleared to the default status. Software should set this bit to 0 after FIFO is cleared.
|
REG_ADC_CLK_DIV
Name: ADC Clock Divider Register
Size: 32
Address offset: 0A0h
Read/write access: R/W
The register to control clock dividend
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_CLK_DIV |
R/W |
3h |
This field defines clock driver level of ADC module. A value of 0 is for clock divided by 2. A value of 1 is for clock divided by 4. A value of 2 is for clock divided by 8. A value of 3 is for clock divided by 12. A value of 4 is for clock divided by 16. A value of 5 is for clock divided by 32. A value of 6 is for clock divided by 64. |
REG_ADC_DELAY_CNT
Name: ADC Delay Count Register
Size: 32
Address offset: 0A4h
Read/write access: R/W
The register to configure ADC delay and channel unmask
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
BIT_ADC_CH_UNMASK |
R/W |
0 |
Enable BIT_ADC_DAT_CHID |
30:10 |
RSVD |
R |
- |
Reserved |
9:8 |
BIT_ADC_CLK_SEL |
R/W |
0 |
Just config to 00 |
7:4 |
RSVD |
R |
- |
Reserved |
3:2 |
BIT_ADC_DELAY |
R/W |
0 |
This field defines channel switch data delay count. A value of 0 is for using default count of hardware. |
1:0 |
BIT_ADC_CTRL_DELAY |
R/W |
0 |
This field defines channel switch ctrl delay count. A value of 0 is for using default count of hardware. |
REG_ADC_PWR_CTRL
Name: ADC Power Control Register
Size: 32
Address offset: 0A8h
Read/write access: R/W
The register to control the ADC power and debug configuration
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3 |
BIT_ADC_DBG_EN |
R/W |
0 |
Debug port enable |
2:1 |
BIT_ADC_DBG_SEL |
R/W |
0 |
Debug port select |
0 |
BIT_ADC_PWR_CTRL |
R/W |
0 |
This field is used to power control |
REG_ADC_SW_TMODE
Name: ADC Software Test Mode
Size: 32
Address offset: 0ACh
Read/write access: R/W
The register to set the software test mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TMODE |
R/W |
0 |
This bit is used to change the high 4 bits in FIFO.
|
Base Address: 0x40812000
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Basic configuration of ADC including enable and operation mode |
|
004h |
R/W |
Analog ADC input type configuration |
|
008h |
R/W |
Channel comparison threshold |
|
00Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
010h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
014h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
018h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
01Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
020h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
024h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
028h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
02Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
030h |
R/W |
Refer to REG_ADC_COMP_TH_CH10 |
|
034h |
R/W |
Channel comparison criterion control register, can be used to control every channel’s comparison criterion. There are 3 kinds of criterions. |
|
038h |
R |
The comparison status of every channel |
|
03Ch |
R/W |
Software channel list 0, to define the analog channels to own channel list |
|
040h |
R/W |
Software channel list 1, refer to REG_ADC_CHSW_LIST_0 |
|
048h |
R/W |
Automatic switch channel function |
|
04Ch |
R/W |
Software controls to trigger the channel switch |
|
050h |
R |
The register records the last channel |
|
054h |
R |
The register reflects the ADC FSM and fifo status |
|
058h |
R/W |
The register to enable or disable the different kinds of interrupts |
|
05Ch |
R |
The register to record the different kinds of interrupt raw status(bypass the enable register’s control) |
|
060h |
R/W |
The register to record the different kinds of interrupt status |
|
064h |
R/W |
The specific channel to trigger interrupt |
|
068h |
R/W |
The fifo full threshold |
|
06Ch |
R/W |
The register to select the specific external timer source |
|
070h |
R |
The register to store the channel data , ready and overwritten information |
|
074h |
R |
Refer to REG_ADC_DATA_CH0 |
|
078h |
R |
Refer to REG_ADC_DATA_CH0 |
|
07Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
080h |
R |
Refer to REG_ADC_DATA_CH0 |
|
084h |
R |
Refer to REG_ADC_DATA_CH0 |
|
088h |
R |
Refer to REG_ADC_DATA_CH0 |
|
08Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
090h |
R |
Refer to REG_ADC_DATA_CH0 |
|
094h |
R |
Refer to REG_ADC_DATA_CH0 |
|
098h |
R |
Refer to REG_ADC_DATA_CH0 |
|
09Ch |
R |
Register to store global data, ready , channel and overwritten information |
|
0A0h |
R |
Register to store fifo entry number |
|
0A4h |
R/W |
Register to clear fifo |
|
0A8h |
R/W |
Register to control clock dividend and channel unmask |
|
0ACh |
R/W |
Register to configure ADC over sample |
|
0B0h |
R/W |
Register to control the ADC power and debug configuration |
|
0B4h |
R/W |
Register to set the software test mode |
|
0B8h |
R/W |
||
0BCh |
R/W |
||
0C0h |
R/W |
||
0C4h |
R/W |
||
0C8h |
R/W |
||
0CCh |
R/W |
||
0D0h |
R/W |
||
0D4h |
R/W |
||
0D8h |
R/W |
||
0DCh |
R/W |
||
0E0h |
R/W |
||
0E4h |
R/W |
||
0E8h |
R/W |
||
0ECh |
R/W |
||
0F0h |
R/W |
||
0F4h |
R/W |
||
0F8h |
R/W |
||
0FCh |
R/W |
||
100h |
R/W |
Dummy register |
REG_ADC_CONF
Name: ADC Configuration Register
Size: 32
Address offset: 000h
Read/write access: R/W
Basic configuration of ADC including enable and operation mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_ENABLE |
R/W |
0h |
This bit is for ADC enable control |
8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_ADC_CVLIST_LEN |
R/W |
0h |
This field defines the number of items in the ADC conversion channel list. |
3:1 |
BIT_ADC_OP_MOD |
R/W |
0h |
These bits selects ADC operation mode. 0: software trigger mode.
|
0 |
RSVD |
R |
- |
Reserved |
REG_ADC_IN_TYPE
Name: ADC Input Type Register
Size: 32
Address offset: 004h
Read/write access: R/W
Analog ADC input type configuration
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:11 |
RSVD |
R |
- |
Reserved |
10 |
BIT_ADC_IN_TYPE_CH10 |
R |
0 |
This bit reflects which kind of input type channel 10 is. Since channel 10 is a fixed internal channel. |
9 |
BIT_ADC_IN_TYPE_CH9 |
R |
0 |
This bit reflects which kind of input type channel 9 is. Since channel 9 is a fixed internal channel. |
8 |
BIT_ADC_IN_TYPE_CH8 |
R |
0 |
This bit reflects which kind of input type channel 8 is. Since channel 8 is a fixed internal channel. |
7 |
BIT_ADC_IN_TYPE_CH7 |
R/W |
0 |
This bit controls channel 7 input type. If it’s set to differential type(value of this bit is 1), channel 6 should also be set to differential type since they are hardware-fixed differential pair.
|
6 |
BIT_ADC_IN_TYPE_CH6 |
R/W |
0 |
This bit controls channel 6 input type. If it’s set to differential type(value of this bit is 1), channel 5 should also be set to differential type since they are hardware-fixed differential pair.
|
5 |
BIT_ADC_IN_TYPE_CH5 |
R/W |
0 |
This bit controls channel 5 input type. If it’s set to differential type(value of this bit is 1), channel 4 should also be set to differential type since they are hardware-fixed differential pair.
|
4 |
BIT_ADC_IN_TYPE_CH4 |
R/W |
0 |
This bit controls channel 4 input type. If it’s set to differential type(value of this bit is 1), channel 5 should also be set to differential type since they are hardware-fixed differential pair.
|
3 |
BIT_ADC_IN_TYPE_CH3 |
R/W |
0 |
This bit controls channel 3 input type. If it’s set to differential type(value of this bit is 1), channel 2 should also be set to differential type since they are hardware-fixed differential pair.
|
2 |
BIT_ADC_IN_TYPE_CH2 |
R/W |
0 |
This bit controls channel 2 input type. If it’s set to differential type(value of this bit is 1), channel 3 should also be set to differential type since they are hardware-fixed differential pair.
|
1 |
BIT_ADC_IN_TYPE_CH1 |
R/W |
0 |
This bit controls channel 1 input type. If it’s set to differential type(value of this bit is 1), channel 0 should also be set to differential type since they are hardware-fixed differential pair.
|
0 |
BIT_ADC_IN_TYPE_CH0 |
R/W |
0 |
This bit controls channel 0 input type. If it’s set to differential type(value of this bit is 1), channel 1 should also be set to differential type since they are hardware-fixed differential pair.
|
REG_ADC_COMP_TH_CH0
Name: ADC Channel 0 Comparison Threshold Register
Size: 32
Address offset: 008h
Read/write access: R/W
Channel comparison threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH0 |
R/W |
0h |
This field defines the higher threshold of channel 0 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH0 |
R/W |
0h |
This field defines the lower threshold of channel 0 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH1
Name: ADC Channel 1 Comparison Threshold Register
Size: 32
Address offset: 00Ch
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH1 |
R/W |
0h |
This field defines the higher threshold of channel 1 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH1 |
R/W |
0h |
This field defines the lower threshold of channel 1 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH2
Name: ADC Channel 2 Comparison Threshold Register
Size: 32
Address offset: 010h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH2 |
R/W |
0h |
This field defines the higher threshold of channel 2 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH2 |
R/W |
0h |
This field defines the lower threshold of channel 2 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH3
Name: ADC Channel 3 Comparison Threshold Register
Size: 32
Address offset: 014h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH3 |
R/W |
0h |
This field defines the higher threshold of channel 3 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH3 |
R/W |
0h |
This field defines the lower threshold of channel 3 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH4
Name: ADC Channel 4 Comparison Threshold Register
Size: 32
Address offset: 018h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH4 |
R/W |
0h |
This field defines the higher threshold of channel 4 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH4 |
R/W |
0h |
This field defines the lower threshold of channel 4 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH5
Name: ADC Channel 5 Comparison Threshold Register
Size: 32
Address offset: 01Ch
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH5 |
R/W |
0h |
This field defines the higher threshold of channel 5 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH5 |
R/W |
0h |
This field defines the lower threshold of channel 5 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH6
Name: ADC Channel 6 Comparison Threshold Register
Size: 32
Address offset: 020h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH6 |
R/W |
0h |
This field defines the higher threshold of channel 6 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH6 |
R/W |
0h |
This field defines the lower threshold of channel 6 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH7
Name: ADC Channel 7 Comparison Threshold Register
Size: 32
Address offset: 024h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH7 |
R/W |
0h |
This field defines the higher threshold of channel 7 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH7 |
R/W |
0h |
This field defines the lower threshold of channel 7 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH8
Name: ADC Channel 8 Comparison Threshold Register
Size: 32
Address offset: 028h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH8 |
R/W |
0h |
This field defines the higher threshold of channel 8 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH8 |
R/W |
0h |
This field defines the lower threshold of channel 8 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH9
Name: ADC Channel 9 Comparison Threshold Register
Size: 32
Address offset: 02Ch
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH9 |
R/W |
0h |
This field defines the higher threshold of channel 9 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH9 |
R/W |
0h |
This field defines the lower threshold of channel 9 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH10
Name: ADC Channel 10 Comparison Threshold Register
Size: 32
Address offset: 030h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH10
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH10 |
R/W |
0h |
This field defines the higher threshold of channel 10 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH10 |
R/W |
0h |
This field defines the lower threshold of channel 10 for ADC automatic comparison. |
REG_ADC_COMP_CTRL
Name: ADC Comparison Control Register
Size: 32
Address offset: 034h
Read/write access: R/W
Channel comparison criterion control register, can be used to control every channel’s comparison
criterion. There are 3 kinds of criterions.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21:20 |
BIT_ADC_COMP_CTRL_CH10 |
R/W |
0h |
This field defines ADC channel comparison criteria which would notify system by interrupt when the criterion matches. Once a criterion matches, ADC should send an interrupt signal to system if the related interrupt mask is unmask. ADC also updates comparison results in reg_adc_comp_sts.
|
19:18 |
BIT_ADC_COMP_CTRL_CH9 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
17:16 |
BIT_ADC_COMP_CTRL_CH8 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
15:14 |
BIT_ADC_COMP_CTRL_CH7 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
13:12 |
BIT_ADC_COMP_CTRL_CH6 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
11:10 |
BIT_ADC_COMP_CTRL_CH5 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
9:8 |
BIT_ADC_COMP_CTRL_CH4 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
7:6 |
BIT_ADC_COMP_CTRL_CH3 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
5:4 |
BIT_ADC_COMP_CTRL_CH2 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
3:2 |
BIT_ADC_COMP_CTRL_CH1 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
1:0 |
BIT_ADC_COMP_CTRL_CH0 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
REG_ADC_COMP_STS
Name: ADC Comparison Status Register
Size: 32
Address offset: 038h
Read/write access: R
The comparison status of every channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21:20 |
BIT_ADC_COMP_STS_CH10 |
R |
0h |
This field reflects the comparison result of channel 10 immediately |
19:18 |
BIT_ADC_COMP_STS_CH9 |
R |
0h |
This field reflects the comparison result of channel 9 immediately |
17:16 |
BIT_ADC_COMP_STS_CH8 |
R |
0h |
This field reflects the comparison result of channel 8 immediately |
15:14 |
BIT_ADC_COMP_STS_CH7 |
R |
0h |
This field reflects the comparison result of channel 7 immediately |
13:12 |
BIT_ADC_COMP_STS_CH6 |
R |
0h |
This field reflects the comparison result of channel 6 immediately |
11:10 |
BIT_ADC_COMP_STS_CH5 |
R |
0h |
This field reflects the comparison result of channel 5 immediately |
9:8 |
BIT_ADC_COMP_STS_CH4 |
R |
0h |
This field reflects the comparison result of channel 4 immediately |
7:6 |
BIT_ADC_COMP_STS_CH3 |
R |
0h |
This field reflects the comparison result of channel 3 immediately |
5:4 |
BIT_ADC_COMP_STS_CH2 |
R |
0h |
This field reflects the comparison result of channel 2 immediately |
3:2 |
BIT_ADC_COMP_STS_CH1 |
R |
0h |
This field reflects the comparison result of channel 1 immediately |
1:0 |
BIT_ADC_COMP_STS_CH0 |
R |
0h |
This field reflects the comparison result of channel 0 immediately |
REG_ADC_CHSW_LIST_0
Name: ADC Channel Switch List 0 Register
Size: 32
Address offset: 03Ch
Read/write access: R/W
Software channel list 0, to define the analog channels to own channel list
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_7 |
R/W |
0h |
This field defines the number 7 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_6 |
R/W |
0h |
This field defines the number 6 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_5 |
R/W |
0h |
This field defines the number 5 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_4 |
R/W |
0h |
This field defines the number 4 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_3 |
R/W |
0h |
This field defines the number 3 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_2 |
R/W |
0h |
This field defines the number 2 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_1 |
R/W |
0h |
This field defines the number 1 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_0 |
R/W |
0h |
This field defines the number 0 channel to do a conversion when a conversion event takes place. |
REG_ADC_CHSW_LIST_1
Name: ADC Channel Switch List 1 Register
Size: 32
Address offset: 040h
Read/write access: R/W
Software channel list 1, refer to REG_ADC_CHSW_LIST_0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_15 |
R/W |
0h |
This field defines the number 15 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_14 |
R/W |
0h |
This field defines the number 14 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_13 |
R/W |
0h |
This field defines the number 13 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_12 |
R/W |
0h |
This field defines the number 12 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_11 |
R/W |
0h |
This field defines the number 11 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_10 |
R/W |
0h |
This field defines the number 10 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_9 |
R/W |
0h |
This field defines the number 9 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_8 |
R/W |
0h |
This field defines the number 8 channel to do a conversion when a conversion event takes place. |
REG_ADC_AUTO_CSW_CTRL
Name: ADC Automatic Channel Switch Control Register
Size: 32
Address offset: 048h
Read/write access: R/W
Automatic switch channel function
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_AUTOSW_EN |
R/W |
0h |
This bit controls the automatic channel switch enabled or disabled.
|
REG_ADC_SW_TRIG
Name: ADC Software Trigger Register
Size: 32
Address offset: 04Ch
Read/write access: R/W
Software controls to trigger the channel switch
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TRIG |
R/W |
0h |
This bit controls the ADC module to do a conversion. Every time this bit is set to 1, ADC module would switch to a new channel and do one conversion. Therefore, this bit could be used as a start-convert event which is controlled by software. Every time a conversion is done, software MUST clear this bit manually. The interval between clearing and restart this bit must exceed one sample clock period.
|
REG_ADC_LAST_CH
Name: ADC Last Channel Register
Size: 32
Address offset: 050h
Read/write access: R
The register records the last channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_LAST_CH |
R |
0h |
This field reflects the last used channel |
REG_ADC_BUSY_STS
Name: ADC Busy Status Register
Size: 32
Address offset: 054h
Read/write access: R
The register reflects the ADC FSM and fifo status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2 |
BIT_ADC_FIFO_EMPTY |
R |
1 |
|
1 |
BIT_ADC_FIFO_FULL_REAL |
R |
0 |
|
0 |
BIT_ADC_BUSY_STS |
R |
0 |
This bit reflects the ADC is busy or not. If the ADC is processing a conversion of a channel, this bit remains 1 which indicates it’s busy. Once a conversion is done, this bit becomes 0 which indicates it’s ready to do another conversion.
|
REG_ADC_INTR_CTRL
Name: ADC Interrupt Control Register
Size: 32
Address offset: 058h
Read/write access: R/W
The register to enable or disable the different kinds of interrupts
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
BIT_ADC_IT_COMP_DET_MOD |
R/W |
0h |
This bit controls the interrupt bit_adc_it_comp_chx operation. comparison criterion matching is rising edge.
|
30:19 |
RSVD |
R |
- |
Reserved |
18 |
BIT_ADC_IT_COMP_CH10_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
17 |
BIT_ADC_IT_COMP_CH9_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
16 |
BIT_ADC_IT_COMP_CH8_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
15 |
BIT_ADC_IT_COMP_CH7_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
14 |
BIT_ADC_IT_COMP_CH6_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
13 |
BIT_ADC_IT_COMP_CH5_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
12 |
BIT_ADC_IT_COMP_CH4_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
11 |
BIT_ADC_IT_COMP_CH3_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
10 |
BIT_ADC_IT_COMP_CH2_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
9 |
BIT_ADC_IT_COMP_CH1_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
8 |
BIT_ADC_IT_COMP_CH0_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 0 comparison criterion matches.
|
7 |
BIT_ADC_IT_ERR_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when an error state takes place.
|
6 |
BIT_ADC_IT_DAT_OVW_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a data overwritten situation takes place.
|
5 |
BIT_ADC_IT_FIFO_EMPTY_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO empty state takes place.
|
4 |
BIT_ADC_IT_FIFO_OVER_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO overflow state takes place.
|
3 |
BIT_ADC_IT_FIFO_FULL_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO full state takes place.
|
2 |
BIT_ADC_IT_CHCV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a particular channel conversion is done. Please refer to reg_adc_it_chno_con
|
1 |
BIT_ADC_IT_CV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not every time a conversion is done. No matter ADC module is in what kind of operation mode. Every time a conversion is executed, ADC module would notify system if This bit is set.
|
0 |
BIT_ADC_IT_CVLIST_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a conversion of the last channel in the list is done. For example, in automatic mode conversions would be executed continuously. Every time the last channel conversion is done, which means all channel conversions in the list is done, ADC could notify system if This bit is set.
|
REG_ADC_INTR_RAW_STS
Name: ADC Interrupt Raw Status Register
Size: 32
Address offset: 05Ch
Read/write access: R
The register to record the different kinds of interrupt raw status(bypass the enable register’s
control)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:19 |
RSVD |
R |
- |
Reserved |
18 |
BIT_ADC_IT_COMP_CH10_RAW_STS |
R |
0h |
|
17 |
BIT_ADC_IT_COMP_CH9_RAW_STS |
R |
0h |
Merged |
16 |
BIT_ADC_IT_COMP_CH8_RAW_STS |
R |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_RAW_STS |
R |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_RAW_STS |
R |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_RAW_STS |
R |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_RAW_STS |
R |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_RAW_STS |
R |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_RAW_STS |
R |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_RAW_STS |
R |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_RAW_STS |
R |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_RAW_STS |
R |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_RAW_STS |
R |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_RAW_STS |
R |
1h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_RAW_STS |
R |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_RAW_STS |
R |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_RAW_STS |
R |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_RAW_STS |
R |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_RAW_STS |
R |
0h |
Merged |
REG_ADC_INTR_STS
Name: ADC Interrupt Status Register
Size: 32
Address offset: 060h
Read/write access: R/W
The register to record the different kinds of interrupt status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:19 |
RSVD |
R |
- |
Reserved |
18 |
BIT_ADC_IT_COMP_CH10_STS |
R/W |
0h |
|
17 |
BIT_ADC_IT_COMP_CH9_STS |
R/W |
0h |
Merged |
16 |
BIT_ADC_IT_COMP_CH8_STS |
R/W |
0h |
Merged |
15 |
BIT_ADC_IT_COMP_CH7_STS |
R/W |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_STS |
R/W |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_STS |
R/W |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_STS |
R/W |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_STS |
R/W |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_STS |
R/W |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_STS |
R/W |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_STS |
R/W |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_STS |
R/W |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_STS |
R/W |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_STS |
R/W |
0h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_STS |
R/W |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_STS |
R/W |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_STS |
R/W |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_STS |
R/W |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_STS |
R/W |
0h |
Merged |
REG_ADC_IT_CHNO_CON
Name: ADC Interrupt Channel Number Configuration Register
Size: 32
Address offset: 064h
Read/write access: R/W
The specific channel to trigger interrupt
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_IT_CHNO_CON |
R/W |
0h |
This field defines that ADC module should send interrupt signal to system when a conversion which of channel number is the same as this field. This register is only valid when bit_adc_it_chcv_end_en is set. Bit_adc_it_chno_con: channel number |
REG_ADC_FULL_LVL
Name: ADC FIFO Full Threshold Register
Size: 32
Address offset: 068h
Read/write access: R/W
The fifo full threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FULL_LVL |
R/W |
0h |
This field defines the FIFO full entry thredshold level and it’s used for FIFO full interrupt. It should be set according to ADC FIFO depth. A value of 0 sets the threshold for 1 entry, and a value of 15 sets the threshold for 16 entries. |
REG_ADC_EXT_TRIG_TIMER_SEL
Name: ADC External Trigger Timer Select Register
Size: 32
Address offset: 06Ch
Read/write access: R/W
The register to select the specific external timer source
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_EXT_TRIG_TIMER_SEL |
R/W |
0h |
These three bits defines which timer channel would be used to make ADC module do a conversion.
|
REG_ADC_DATA_CH0
Name: ADC Channel 0 Data Register
Size: 32
Address offset: 070h
Read/write access: R
The register to store the channel data , ready and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH0 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch0. |
20 |
BIT_ADC_DAT_OVW_CH0 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch0.
|
19:16 |
BIT_ADC_NUM_CH0 |
R |
0 |
This field contains the newsest conversion data of channel 0 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH0 |
R |
0 |
This field contains the newsest conversion data of channel 0 [15:0]: newest data |
REG_ADC_DATA_CH1
Name: ADC Channel 1 Data Register
Size: 32
Address offset: 074h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH1 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch1. |
20 |
BIT_ADC_DAT_OVW_CH1 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch1.
|
19:16 |
BIT_ADC_NUM_CH1 |
R |
0 |
This field contains the newsest conversion data of channel 1 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH1 |
R |
0 |
This field contains the newsest conversion data of channel 1 [15:0]: newest data |
REG_ADC_DATA_CH2
Name: ADC Channel 2 Data Register
Size: 32
Address offset: 078h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH2 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch2. |
20 |
BIT_ADC_DAT_OVW_CH2 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch2.
|
19:16 |
BIT_ADC_NUM_CH2 |
R |
0 |
This field contains the newsest conversion data of channel 2 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH2 |
R |
0 |
This field contains the newsest conversion data of channel 2 [15:0]: newest data |
REG_ADC_DATA_CH3
Name: ADC Channel 3 Data Register
Size: 32
Address offset: 07Ch
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH3 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch3. |
20 |
BIT_ADC_DAT_OVW_CH3 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch3.
|
19:16 |
BIT_ADC_NUM_CH3 |
R |
0 |
This field contains the newsest conversion data of channel 3 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH3 |
R |
0 |
This field contains the newsest conversion data of channel 3 [15:0]: newest data |
REG_ADC_DATA_CH4
Name: ADC Channel 4 Data Register
Size: 32
Address offset: 080h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH4 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch4. |
20 |
BIT_ADC_DAT_OVW_CH4 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch4.
|
19:16 |
BIT_ADC_NUM_CH4 |
R |
0 |
This field contains the newsest conversion data of channel 4 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH4 |
R |
0 |
This field contains the newsest conversion data of channel 4 [15:0]: newest data |
REG_ADC_DATA_CH5
Name: ADC Channel 5 Data Register
Size: 32
Address offset: 084h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH5 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch5. |
20 |
BIT_ADC_DAT_OVW_CH5 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch5.
|
19:16 |
BIT_ADC_NUM_CH5 |
R |
0 |
This field contains the newsest conversion data of channel 5 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH5 |
R |
0 |
This field contains the newsest conversion data of channel 5 [15:0]: newest data |
REG_ADC_DATA_CH6
Name: ADC Channel 6 Data Register
Size: 32
Address offset: 088h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH6 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch6. |
20 |
BIT_ADC_DAT_OVW_CH6 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch6.
|
19:16 |
BIT_ADC_NUM_CH6 |
R |
0 |
This field contains the newsest conversion data of channel 6 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH6 |
R |
0 |
This field contains the newsest conversion data of channel 6 [15:0]: newest data |
REG_ADC_DATA_CH7
Name: ADC Channel 7 Data Register
Size: 32
Address offset: 08Ch
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH7 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch7. |
20 |
BIT_ADC_DAT_OVW_CH7 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch7.
|
19:16 |
BIT_ADC_NUM_CH7 |
R |
0 |
This field contains the newsest conversion data of channel 7 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH7 |
R |
0 |
This field contains the newsest conversion data of channel 7 [15:0]: newest data |
REG_ADC_DATA_CH8
Name: ADC Channel 8 Data Register
Size: 32
Address offset: 090h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH8 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch8. |
20 |
BIT_ADC_DAT_OVW_CH8 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch8.
|
19:16 |
BIT_ADC_NUM_CH8 |
R |
0 |
This field contains the newsest conversion data of channel 8 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH8 |
R |
0 |
This field contains the newsest conversion data of channel 8 [15:0]: newest data |
REG_ADC_DATA_CH9
Name: ADC Channel 9 Data Register
Size: 32
Address offset: 094h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH9 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch9. |
20 |
BIT_ADC_DAT_OVW_CH9 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch9.
|
19:16 |
BIT_ADC_NUM_CH9 |
R |
0 |
This field contains the newsest conversion data of channel 9 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH9 |
R |
0 |
This field contains the newsest conversion data of channel 9 [15:0]: newest data |
REG_ADC_DATA_CH10
Name: ADC Channel 9 Data Register
Size: 32
Address offset: 098h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH10 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch10. |
20 |
BIT_ADC_DAT_OVW_CH10 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch10.
|
19:16 |
BIT_ADC_NUM_CH10 |
R |
0 |
This field contains the newsest conversion data of channel 10 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH10 |
R |
0 |
This field contains the newsest conversion data of channel 10 [15:0]: newest data |
REG_ADC_DATA_GLOBAL
Name: ADC Global Data Register
Size: 32
Address offset: 09Ch
Read/write access: R
Register to store global data, ready , channel and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_GLOBAL |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_global |
20 |
BIT_ADC_DAT_OVW_GLOBAL |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takes place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field.
|
19:16 |
BIT_ADC_CH_NUM_GLOBAL |
R |
0 |
This field contains the newsest conversion data of channel in the list. [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_GLOBAL |
R |
0 |
This field contains the newsest conversion data of channel in the list. [15:0]: newest data |
REG_ADC_FLR
Name: ADC FIFO Level Register
Size: 32
Address offset: 0A0h
Read/write access: R
Register to store fifo entry number
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FLR |
R |
0 |
This field records the current ADC FIFO entry number. |
REG_ADC_CLR_FIFO
Name: ADC Clear FIFO Register
Size: 32
Address offset: 0A4h
Read/write access: R/W
Register to clear fifo
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_CLR_FIFO |
R/W |
0 |
This bit is used to clear FIFO contents and makes it to the default status. Every time this bit is set to 1. FIFO would be cleared to the default status. Software should set this bit to 0 after FIFO is cleared.
|
REG_ADC_SETTLE
Name: ADC Settle Register
Size: 32
Address offset: 0A8h
Read/write access: R/W
Register to control clock dividend and channel unmask
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_SETTLE_POW_ON |
R/W |
0h |
Settle count for sample data from power on , the unit is adc sample clock. 0 means no need to settle |
3:0 |
BIT_SETTLE_CTC_TO_ADC |
R/W |
0h |
Settle count for sample data from captouch to ADC, the unit is adc sample clock. 0 means no need to settle |
REG_ADC_OVERSAMPLE
Name: ADC Over Sample Register
Size: 32
Address offset: 0ACh
Read/write access: R/W
Register to configure ADC over sample
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:9 |
RSVD |
R |
- |
Reserved |
8:6 |
BIT_ADC_OSF |
R/W |
0 |
Oversampling right shift
|
5:3 |
BIT_ADC_OSR |
R/W |
0 |
Over sample ratio
|
2 |
RSVD |
R |
- |
Reserved |
1 |
BIT_OV_MODE |
R/W |
0 |
Oversample mode 1-All oversampling conversions done in regular sequence 0-All oversampling conversions done in staggered sequence |
0 |
BIT_ADC_OS_EN |
R/W |
0 |
Over sample enable 1-enable; 0-disable |
REG_ADC_PWR_CTRL
Name: ADC Power Control Register
Size: 32
Address offset: 0B0h
Read/write access: R/W
Register to control the ADC power and debug configuration
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:5 |
RSVD |
R |
- |
Reserved |
4 |
BIT_ADC_PWR_KEEP |
R/W |
0 |
Keep adc power on at all times. automatic adjustment resumes after shutdown.
|
3 |
BIT_ADC_DBG_EN |
R/W |
0 |
Debug port enable |
2:1 |
BIT_ADC_DBG_SEL |
R/W |
0 |
Debug port select |
0 |
BIT_ADC_PWR_CTRL |
R/W |
0 |
This field is used to power control |
REG_ADC_SW_TMODE
Name: ADC Software Test Mode
Size: 32
Address offset: 0B4h
Read/write access: R/W
Register to set the software test mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TMODE |
R/W |
0 |
This bit is used to change the high 4 bits in FIFO.
|
REG_ADC_CLK_HCNT0_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0B8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT0 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt0+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT1_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0BCh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT1 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt1+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT2_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0C0h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT2 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt2+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT3_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0C4h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT3 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt3+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT4_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0C8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT4 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt4+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT5_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0CCh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT5 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt5+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT6_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0D0h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT6 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt6+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT7_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0D4h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT7 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt7+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT8_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0D8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT8 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt8+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT9_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0DCh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT9 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt9+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT10_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0E0h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT10 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt10+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT11_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0E4h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT11 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt11+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT12_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0E8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT12 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt12+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT13_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0ECh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT13 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt13+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT14_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0F0h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT14 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt14+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT15_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 0F4h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT15 |
R/W |
12’d21 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt15+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_LCNT0_DIV
Name: ADC Clock Divider Register
Size: 32
Address offset: 0F8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_CLK_LCNT |
R/W |
6’d2 |
This field defines clock driver lower level of chn in ADC module.when source clock is 4M, the duration of low level need >=2 for timing req.(>=0.5us) Lower level =bit_adc_clk_lcnt* ip_clk period |
REG_ADC_DUMMY_CNT
Name: ADC Dummy Cnt Register
Size: 32
Address offset: 0FCh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:25 |
RSVD |
R |
- |
Reserved |
24:0 |
BIT_ADC_DUMMY_CHN_SCNT |
R/W |
0h |
Dummy channel time counter. in auto mode, adc share the dummy channel for captouch. this reg controls the time of dummy channel. |
REG_ADC_DUMMY
Name: ADC Dummy Register
Size: 32
Address offset: 100h
Read/write access: R/W
Dummy register
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
DUMMY |
R/W |
ffffh |
Dummy register |
ADC Registers
Base Address: 0x40803000
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
Basic configuration of ADC including enable and operation mode |
|
008h |
R/W |
Channel comparison threshold |
|
00Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
010h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
014h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
018h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
01Ch |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
020h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
024h |
R/W |
Refer to REG_ADC_COMP_TH_CH0 |
|
034h |
R/W |
Channel comparison criterion control register, can be used to control every channel’s comparison criterion. There are 3 kinds of criterions. |
|
038h |
R |
The comparison status of every channel |
|
03Ch |
R/W |
Software channel list 0, to define the analog channels to own channel list |
|
040h |
R/W |
Software channel list 1, refer to REG_ADC_CHSW_LIST_0 |
|
048h |
R/W |
Automatic switch channel function |
|
04Ch |
R/W |
Software controls to trigger the channel switch |
|
050h |
R |
The register records the last channel |
|
054h |
R |
The register reflects the ADC FSM and fifo status |
|
058h |
R/W |
The register to enable or disable the different kinds of interrupts |
|
05Ch |
R |
The register to record the different kinds of interrupt raw status(bypass the enable register’s control) |
|
060h |
R/W |
The register to record the different kinds of interrupt status |
|
064h |
R/W |
The specific channel to trigger interrupt |
|
068h |
R/W |
The fifo full threshold |
|
06Ch |
R/W |
The register to select the specific external timer source |
|
070h |
R |
The register to store the channel data , ready and overwritten information |
|
074h |
R |
Refer to REG_ADC_DATA_CH0 |
|
078h |
R |
Refer to REG_ADC_DATA_CH0 |
|
07Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
080h |
R |
Refer to REG_ADC_DATA_CH0 |
|
084h |
R |
Refer to REG_ADC_DATA_CH0 |
|
088h |
R |
Refer to REG_ADC_DATA_CH0 |
|
08Ch |
R |
Refer to REG_ADC_DATA_CH0 |
|
090h |
R |
Refer to REG_ADC_DATA_CH0 |
|
09Ch |
R |
Register to store global data, ready , channel and overwritten information |
|
0A0h |
R |
Register to store fifo entry number |
|
0A4h |
R/W |
Register to clear fifo |
|
0A8h |
R/W |
Register to control clock dividend and channel unmask |
|
0ACh |
R/W |
Register to configure ADC over sample |
|
0B0h |
R/W |
Register to control the ADC power and debug configuration |
|
0B4h |
R/W |
Register to set the software test mode |
|
0B8h |
R/W |
||
0BCh |
R/W |
||
0C0h |
R/W |
||
0C4h |
R/W |
||
0C8h |
R/W |
||
0CCh |
R/W |
||
0D0h |
R/W |
||
0D4h |
R/W |
Dummy register |
REG_ADC_CONF
Name: ADC Configuration Register
Size: 32
Address offset: 000h
Read/write access: R/W
Basic configuration of ADC including enable and operation mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
BIT_ADC_ENABLE |
R/W |
1h |
This bit is for ADC enable control |
8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_ADC_CVLIST_LEN |
R/W |
0h |
This field defines the number of items in the ADC conversion channel list. |
3:1 |
BIT_ADC_OP_MOD |
R/W |
1h |
These bits selects ADC operation mode. 0: software trigger mode.
|
0 |
RSVD |
R |
- |
Reserved |
REG_ADC_COMP_TH_CH0
Name: ADC Channel 0 Comparison Threshold Register
Size: 32
Address offset: 008h
Read/write access: R/W
Channel comparison threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH0 |
R/W |
0h |
This field defines the higher threshold of channel 0 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH0 |
R/W |
0h |
This field defines the lower threshold of channel 0 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH1
Name: ADC Channel 1 Comparison Threshold Register
Size: 32
Address offset: 00Ch
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH1 |
R/W |
0h |
This field defines the higher threshold of channel 1 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH1 |
R/W |
0h |
This field defines the lower threshold of channel 1 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH2
Name: ADC Channel 2 Comparison Threshold Register
Size: 32
Address offset: 010h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH2 |
R/W |
0h |
This field defines the higher threshold of channel 2 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH2 |
R/W |
0h |
This field defines the lower threshold of channel 2 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH3
Name: ADC Channel 3 Comparison Threshold Register
Size: 32
Address offset: 014h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH3 |
R/W |
0h |
This field defines the higher threshold of channel 3 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH3 |
R/W |
0h |
This field defines the lower threshold of channel 3 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH4
Name: ADC Channel 4 Comparison Threshold Register
Size: 32
Address offset: 018h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH4 |
R/W |
0h |
This field defines the higher threshold of channel 4 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH4 |
R/W |
0h |
This field defines the lower threshold of channel 4 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH5
Name: ADC Channel 5 Comparison Threshold Register
Size: 32
Address offset: 01Ch
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH5 |
R/W |
0h |
This field defines the higher threshold of channel 5 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH5 |
R/W |
0h |
This field defines the lower threshold of channel 5 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH6
Name: ADC Channel 6 Comparison Threshold Register
Size: 32
Address offset: 020h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH6 |
R/W |
0h |
This field defines the higher threshold of channel 6 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH6 |
R/W |
0h |
This field defines the lower threshold of channel 6 for ADC automatic comparison. |
REG_ADC_COMP_TH_CH7
Name: ADC Channel 7 Comparison Threshold Register
Size: 32
Address offset: 024h
Read/write access: R/W
Refer to REG_ADC_COMP_TH_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
BIT_ADC_COMP_TH_H_CH7 |
R/W |
0h |
This field defines the higher threshold of channel 7 for ADC automatic comparison. |
15:0 |
BIT_ADC_COMP_TH_L_CH7 |
R/W |
0h |
This field defines the lower threshold of channel 7 for ADC automatic comparison. |
REG_ADC_COMP_CTRL
Name: ADC Comparison Control Register
Size: 32
Address offset: 034h
Read/write access: R/W
Channel comparison criterion control register, can be used to control every channel’s comparison
criterion. There are 3 kinds of criterions.
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:14 |
BIT_ADC_COMP_CTRL_CH7 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
13:12 |
BIT_ADC_COMP_CTRL_CH6 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
11:10 |
BIT_ADC_COMP_CTRL_CH5 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
9:8 |
BIT_ADC_COMP_CTRL_CH4 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
7:6 |
BIT_ADC_COMP_CTRL_CH3 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
5:4 |
BIT_ADC_COMP_CTRL_CH2 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
3:2 |
BIT_ADC_COMP_CTRL_CH1 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
1:0 |
BIT_ADC_COMP_CTRL_CH0 |
R/W |
0h |
The function is same as bit_adc_comp_ctrl_ch10 |
REG_ADC_COMP_STS
Name: ADC Comparison Status Register
Size: 32
Address offset: 038h
Read/write access: R
The comparison status of every channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:14 |
BIT_ADC_COMP_STS_CH7 |
R |
0h |
This field reflects the comparison result of channel 7 immediately |
13:12 |
BIT_ADC_COMP_STS_CH6 |
R |
0h |
This field reflects the comparison result of channel 6 immediately |
11:10 |
BIT_ADC_COMP_STS_CH5 |
R |
0h |
This field reflects the comparison result of channel 5 immediately |
9:8 |
BIT_ADC_COMP_STS_CH4 |
R |
0h |
This field reflects the comparison result of channel 4 immediately |
7:6 |
BIT_ADC_COMP_STS_CH3 |
R |
0h |
This field reflects the comparison result of channel 3 immediately |
5:4 |
BIT_ADC_COMP_STS_CH2 |
R |
0h |
This field reflects the comparison result of channel 2 immediately |
3:2 |
BIT_ADC_COMP_STS_CH1 |
R |
0h |
This field reflects the comparison result of channel 1 immediately |
1:0 |
BIT_ADC_COMP_STS_CH0 |
R |
0h |
This field reflects the comparison result of channel 0 immediately |
REG_ADC_CHSW_LIST_0
Name: ADC Channel Switch List 0 Register
Size: 32
Address offset: 03Ch
Read/write access: R/W
Software channel list 0, to define the analog channels to own channel list
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_7 |
R/W |
0h |
This field defines the number 7 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_6 |
R/W |
0h |
This field defines the number 6 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_5 |
R/W |
0h |
This field defines the number 5 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_4 |
R/W |
0h |
This field defines the number 4 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_3 |
R/W |
0h |
This field defines the number 3 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_2 |
R/W |
0h |
This field defines the number 2 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_1 |
R/W |
0h |
This field defines the number 1 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_0 |
R/W |
4’h8 |
This field defines the number 0 channel to do a conversion when a conversion event takes place. |
REG_ADC_CHSW_LIST_1
Name: ADC Channel Switch List 1 Register
Size: 32
Address offset: 040h
Read/write access: R/W
Software channel list 1, refer to REG_ADC_CHSW_LIST_0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:28 |
BIT_ADC_CHSW_15 |
R/W |
0h |
This field defines the number 15 channel to do a conversion when a conversion event takes place. |
27:24 |
BIT_ADC_CHSW_14 |
R/W |
0h |
This field defines the number 14 channel to do a conversion when a conversion event takes place. |
23:20 |
BIT_ADC_CHSW_13 |
R/W |
0h |
This field defines the number 13 channel to do a conversion when a conversion event takes place. |
19:16 |
BIT_ADC_CHSW_12 |
R/W |
0h |
This field defines the number 12 channel to do a conversion when a conversion event takes place. |
15:12 |
BIT_ADC_CHSW_11 |
R/W |
0h |
This field defines the number 11 channel to do a conversion when a conversion event takes place. |
11:8 |
BIT_ADC_CHSW_10 |
R/W |
0h |
This field defines the number 10 channel to do a conversion when a conversion event takes place. |
7:4 |
BIT_ADC_CHSW_9 |
R/W |
0h |
This field defines the number 9 channel to do a conversion when a conversion event takes place. |
3:0 |
BIT_ADC_CHSW_8 |
R/W |
0h |
This field defines the number 8 channel to do a conversion when a conversion event takes place. |
REG_ADC_AUTO_CSW_CTRL
Name: ADC Automatic Channel Switch Control Register
Size: 32
Address offset: 048h
Read/write access: R/W
Automatic switch channel function
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_AUTOSW_EN |
R/W |
0h |
This bit controls the automatic channel switch enabled or disabled.
|
REG_ADC_SW_TRIG
Name: ADC Software Trigger Register
Size: 32
Address offset: 04Ch
Read/write access: R/W
Software controls to trigger the channel switch
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TRIG |
R/W |
0h |
This bit controls the ADC module to do a conversion. Every time this bit is set to 1, ADC module would switch to a new channel and do one conversion. Therefore, this bit could be used as a start-convert event which is controlled by software. Every time a conversion is done, software MUST clear this bit manually. The interval between clearing and restart this bit must exceed one sample clock period.
|
REG_ADC_LAST_CH
Name: ADC Last Channel Register
Size: 32
Address offset: 050h
Read/write access: R
The register records the last channel
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_LAST_CH |
R |
0h |
This field reflects the last used channel |
REG_ADC_BUSY_STS
Name: ADC Busy Status Register
Size: 32
Address offset: 054h
Read/write access: R
The register reflects the ADC FSM and fifo status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2 |
BIT_ADC_FIFO_EMPTY |
R |
1 |
|
1 |
BIT_ADC_FIFO_FULL_REAL |
R |
0 |
|
0 |
BIT_ADC_BUSY_STS |
R |
0 |
This bit reflects the ADC is busy or not. If the ADC is processing a conversion of a channel, this bit remains 1 which indicates it’s busy. Once a conversion is done, this bit becomes 0 which indicates it’s ready to do another conversion.
|
REG_ADC_INTR_CTRL
Name: ADC Interrupt Control Register
Size: 32
Address offset: 058h
Read/write access: R/W
The register to enable or disable the different kinds of interrupts
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
BIT_ADC_IT_COMP_DET_MOD |
R/W |
0h |
This bit controls the interrupt bit_adc_it_comp_chx operation. comparison criterion matching is rising edge.
|
30:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_IT_TM_LOW_WT_EN |
R/W |
0h |
Interrupt control for thermal meter detect low temperature.
|
20 |
BIT_ADC_IT_TM_HIGH_WT_EN |
R/W |
0h |
Interrupt control for thermal meter detect over temperature warning.
|
19 |
BIT_ADC_BREAK_TIMEOUT_EN |
R/W |
0h |
When the ADC does not respond for a long time due to CTC occupation, an interrupt will be triggered.
|
18:16 |
RSVD |
R |
- |
Reserved |
15 |
BIT_ADC_IT_COMP_CH7_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
14 |
BIT_ADC_IT_COMP_CH6_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
13 |
BIT_ADC_IT_COMP_CH5_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
12 |
BIT_ADC_IT_COMP_CH4_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
11 |
BIT_ADC_IT_COMP_CH3_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
10 |
BIT_ADC_IT_COMP_CH2_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
9 |
BIT_ADC_IT_COMP_CH1_EN |
R/W |
0h |
The function is same as bit_adc_it_comp_ch0_en |
8 |
BIT_ADC_IT_COMP_CH0_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when channel 0 comparison criterion matches.
|
7 |
BIT_ADC_IT_ERR_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when an error state takes place.
|
6 |
BIT_ADC_IT_DAT_OVW_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a data overwritten situation takes place.
|
5 |
BIT_ADC_IT_FIFO_EMPTY_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO empty state takes place.
|
4 |
BIT_ADC_IT_FIFO_OVER_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO overflow state takes place.
|
3 |
BIT_ADC_IT_FIFO_FULL_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a FIFO full state takes place.
|
2 |
BIT_ADC_IT_CHCV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a particular channel conversion is done. Please refer to reg_adc_it_chno_con
|
1 |
BIT_ADC_IT_CV_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not every time a conversion is done. No matter ADC module is in what kind of operation mode. Every time a conversion is executed, ADC module would notify system if This bit is set.
|
0 |
BIT_ADC_IT_CVLIST_END_EN |
R/W |
0h |
This bit controls the interrupt is enabled or not when a conversion of the last channel in the list is done. For example, in automatic mode conversions would be executed continuously. Every time the last channel conversion is done, which means all channel conversions in the list is done, ADC could notify system if This bit is set.
|
REG_ADC_INTR_RAW_STS
Name: ADC Interrupt Raw Status Register
Size: 32
Address offset: 05Ch
Read/write access: R
The register to record the different kinds of interrupt raw status(bypass the enable register’s
control)
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_IT_TM_LOW_WT_RAW_STS |
R |
0h |
|
20 |
BIT_ADC_IT_TM_HIGH_WT_RAW_STS |
R |
0h |
Merged |
19 |
BIT_ADC_BREAK_TIMEOUT_RAW_STS |
R |
0h |
Merged |
18:16 |
RSVD |
R |
- |
Reserved |
15 |
BIT_ADC_IT_COMP_CH7_RAW_STS |
R |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_RAW_STS |
R |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_RAW_STS |
R |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_RAW_STS |
R |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_RAW_STS |
R |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_RAW_STS |
R |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_RAW_STS |
R |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_RAW_STS |
R |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_RAW_STS |
R |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_RAW_STS |
R |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_RAW_STS |
R |
1h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_RAW_STS |
R |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_RAW_STS |
R |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_RAW_STS |
R |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_RAW_STS |
R |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_RAW_STS |
R |
0h |
Merged |
REG_ADC_INTR_STS
Name: ADC Interrupt Status Register
Size: 32
Address offset: 060h
Read/write access: R/W
The register to record the different kinds of interrupt status
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_IT_TM_LOW_WT_STS |
R/W |
0h |
|
20 |
BIT_ADC_IT_TM_HIGH_WT_STS |
R/W |
0h |
|
19 |
BIT_ADC_BREAK_TIMEOUT_STS |
R/W |
0h |
|
18:16 |
RSVD |
R |
- |
Reserved |
15 |
BIT_ADC_IT_COMP_CH7_STS |
R/W |
0h |
Merged |
14 |
BIT_ADC_IT_COMP_CH6_STS |
R/W |
0h |
Merged |
13 |
BIT_ADC_IT_COMP_CH5_STS |
R/W |
0h |
Merged |
12 |
BIT_ADC_IT_COMP_CH4_STS |
R/W |
0h |
Merged |
11 |
BIT_ADC_IT_COMP_CH3_STS |
R/W |
0h |
Merged |
10 |
BIT_ADC_IT_COMP_CH2_STS |
R/W |
0h |
Merged |
9 |
BIT_ADC_IT_COMP_CH1_STS |
R/W |
0h |
Merged |
8 |
BIT_ADC_IT_COMP_CH0_STS |
R/W |
0h |
Merged |
7 |
BIT_ADC_IT_ERR_STS |
R/W |
0h |
Merged |
6 |
BIT_ADC_IT_DAT_OVW_STS |
R/W |
0h |
Merged |
5 |
BIT_ADC_IT_FIFO_EMPTY_STS |
R/W |
0h |
Merged |
4 |
BIT_ADC_IT_FIFO_OVER_STS |
R/W |
0h |
Merged |
3 |
BIT_ADC_IT_FIFO_FULL_STS |
R/W |
0h |
Merged |
2 |
BIT_ADC_IT_CHCV_END_STS |
R/W |
0h |
Merged |
1 |
BIT_ADC_IT_CV_END_STS |
R/W |
0h |
Merged |
0 |
BIT_ADC_IT_CVLIST_END_STS |
R/W |
0h |
Merged |
REG_ADC_IT_CHNO_CON
Name: ADC Interrupt Channel Number Configuration Register
Size: 32
Address offset: 064h
Read/write access: R/W
The specific channel to trigger interrupt
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
BIT_ADC_IT_CHNO_CON |
R/W |
0h |
This field defines that ADC module should send interrupt signal to system when a conversion which of channel number is the same as this field. This register is only valid when bit_adc_it_chcv_end_en is set. Bit_adc_it_chno_con: channel number |
REG_ADC_FULL_LVL
Name: ADC FIFO Full Threshold Register
Size: 32
Address offset: 068h
Read/write access: R/W
The fifo full threshold
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FULL_LVL |
R/W |
0h |
This field defines the FIFO full entry thredshold level and it’s used for FIFO full interrupt. It should be set according to ADC FIFO depth. A value of 0 sets the threshold for 1 entry, and a value of 15 sets the threshold for 16 entries. |
REG_ADC_EXT_TRIG_TIMER_SEL
Name: ADC External Trigger Timer Select Register
Size: 32
Address offset: 06Ch
Read/write access: R/W
The register to select the specific external timer source
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:3 |
RSVD |
R |
- |
Reserved |
2:0 |
BIT_ADC_EXT_TRIG_TIMER_SEL |
R/W |
0h |
These three bits defines which timer channel would be used to make ADC module do a conversion.
|
REG_ADC_DATA_CH0
Name: ADC Channel 0 Data Register
Size: 32
Address offset: 070h
Read/write access: R
The register to store the channel data , ready and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH0 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch0. |
20 |
BIT_ADC_DAT_OVW_CH0 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch0.
|
19:16 |
BIT_ADC_NUM_CH0 |
R |
0 |
This field contains the newsest conversion data of channel 0 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH0 |
R |
0 |
This field contains the newsest conversion data of channel 0 [15:0]: newest data |
REG_ADC_DATA_CH1
Name: ADC Channel 1 Data Register
Size: 32
Address offset: 074h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH1 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch1. |
20 |
BIT_ADC_DAT_OVW_CH1 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch1.
|
19:16 |
BIT_ADC_NUM_CH1 |
R |
0 |
This field contains the newsest conversion data of channel 1 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH1 |
R |
0 |
This field contains the newsest conversion data of channel 1 [15:0]: newest data |
REG_ADC_DATA_CH2
Name: ADC Channel 2 Data Register
Size: 32
Address offset: 078h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH2 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch2. |
20 |
BIT_ADC_DAT_OVW_CH2 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch2.
|
19:16 |
BIT_ADC_NUM_CH2 |
R |
0 |
This field contains the newsest conversion data of channel 2 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH2 |
R |
0 |
This field contains the newsest conversion data of channel 2 [15:0]: newest data |
REG_ADC_DATA_CH3
Name: ADC Channel 3 Data Register
Size: 32
Address offset: 07Ch
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH3 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch3. |
20 |
BIT_ADC_DAT_OVW_CH3 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch3.
|
19:16 |
BIT_ADC_NUM_CH3 |
R |
0 |
This field contains the newsest conversion data of channel 3 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH3 |
R |
0 |
This field contains the newsest conversion data of channel 3 [15:0]: newest data |
REG_ADC_DATA_CH4
Name: ADC Channel 4 Data Register
Size: 32
Address offset: 080h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH4 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch4. |
20 |
BIT_ADC_DAT_OVW_CH4 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch4.
|
19:16 |
BIT_ADC_NUM_CH4 |
R |
0 |
This field contains the newsest conversion data of channel 4 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH4 |
R |
0 |
This field contains the newsest conversion data of channel 4 [15:0]: newest data |
REG_ADC_DATA_CH5
Name: ADC Channel 5 Data Register
Size: 32
Address offset: 084h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH5 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch5. |
20 |
BIT_ADC_DAT_OVW_CH5 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch5.
|
19:16 |
BIT_ADC_NUM_CH5 |
R |
0 |
This field contains the newsest conversion data of channel 5 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH5 |
R |
0 |
This field contains the newsest conversion data of channel 5 [15:0]: newest data |
REG_ADC_DATA_CH6
Name: ADC Channel 6 Data Register
Size: 32
Address offset: 088h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH6 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch6. |
20 |
BIT_ADC_DAT_OVW_CH6 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch6.
|
19:16 |
BIT_ADC_NUM_CH6 |
R |
0 |
This field contains the newsest conversion data of channel 6 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH6 |
R |
0 |
This field contains the newsest conversion data of channel 6 [15:0]: newest data |
REG_ADC_DATA_CH7
Name: ADC Channel 7 Data Register
Size: 32
Address offset: 08Ch
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH7 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch7. |
20 |
BIT_ADC_DAT_OVW_CH7 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch7.
|
19:16 |
BIT_ADC_NUM_CH7 |
R |
0 |
This field contains the newsest conversion data of channel 7 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH7 |
R |
0 |
This field contains the newsest conversion data of channel 7 [15:0]: newest data |
REG_ADC_DATA_CH8
Name: ADC Channel 8 Data Register
Size: 32
Address offset: 090h
Read/write access: R
Refer to REG_ADC_DATA_CH0
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_CH8 |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_ch8. |
20 |
BIT_ADC_DAT_OVW_CH8 |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takeing place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field. It would be cleared to 0 when a read operation of reg_adc_data_ch8.
|
19:16 |
BIT_ADC_NUM_CH8 |
R |
0 |
This field contains the newsest conversion data of channel 8 [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_CH8 |
R |
0 |
This field contains the newsest conversion data of channel 8 [15:0]: newest data |
REG_ADC_DATA_GLOBAL
Name: ADC Global Data Register
Size: 32
Address offset: 09Ch
Read/write access: R
Register to store global data, ready , channel and overwritten information
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:22 |
RSVD |
R |
- |
Reserved |
21 |
BIT_ADC_DAT_RDY_GLOBAL |
R |
0 |
This bit indicates that a conversion is done. Every time a conversion is done, this bit should be set to 1 and it would be cleared to 0 when a read operation of reg_adc_data_global |
20 |
BIT_ADC_DAT_OVW_GLOBAL |
R |
0 |
This bit indicates that there is a data overwritten situation in bit_adc_data_global takes place. A data overwritten situation is that a former conversion data is NOT read before a new conversion is written to data field.
|
19:16 |
BIT_ADC_CH_NUM_GLOBAL |
R |
0 |
This field contains the newsest conversion data of channel in the list. [19:16]: which channel in channel list the data belongs to, only valid when bit_adc_ch_unmask=1 |
15:0 |
BIT_ADC_DATA_GLOBAL |
R |
0 |
This field contains the newsest conversion data of channel in the list. [15:0]: newest data |
REG_ADC_FLR
Name: ADC FIFO Level Register
Size: 32
Address offset: 0A0h
Read/write access: R
Register to store fifo entry number
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:6 |
RSVD |
R |
- |
Reserved |
5:0 |
BIT_ADC_FLR |
R |
0 |
This field records the current ADC FIFO entry number. |
REG_ADC_CLR_FIFO
Name: ADC Clear FIFO Register
Size: 32
Address offset: 0A4h
Read/write access: R/W
Register to clear fifo
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_CLR_FIFO |
R/W |
0 |
This bit is used to clear FIFO contents and makes it to the default status. Every time this bit is set to 1. FIFO would be cleared to the default status. Software should set this bit to 0 after FIFO is cleared.
|
REG_ADC_SETTLE
Name: ADC Settle Register
Size: 32
Address offset: 0A8h
Read/write access: R/W
Register to control clock dividend and channel unmask
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:8 |
RSVD |
R |
- |
Reserved |
7:4 |
BIT_SETTLE_POW_ON |
R/W |
0h |
Settle count for sample data from power on , the unit is sample clock. 0 means no need to settle |
3:0 |
BIT_SETTLE_CH_SWITCH |
R/W |
0h |
Settle count for sample data from chn switch, the unit is sample clock. 0 means no need to settle |
REG_ADC_OVERSAMPLE
Name: ADC Over Sample Register
Size: 32
Address offset: 0ACh
Read/write access: R/W
Register to configure ADC over sample
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:9 |
RSVD |
R |
- |
Reserved |
8:6 |
BIT_ADC_OSF |
R/W |
0 |
Oversampling right shift
|
5:2 |
BIT_ADC_OSR |
R/W |
0 |
Over sample ratio
|
1 |
BIT_OV_MODE |
R/W |
1 |
Oversample mode 1-All oversampling conversions done in regular sequence 0-All oversampling conversions done in staggered sequence |
0 |
RSVD |
R |
- |
Reserved |
REG_ADC_PWR_CTRL
Name: ADC Power Control Register
Size: 32
Address offset: 0B0h
Read/write access: R/W
Register to control the ADC power and debug configuration
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:5 |
RSVD |
R |
- |
Reserved |
4 |
BIT_ADC_PWR_KEEP |
R/W |
0 |
Keep adc power on at all times. automatic adjustment resumes after shutdown.
|
3 |
BIT_ADC_DBG_EN |
R/W |
0 |
Debug port enable |
2:1 |
BIT_ADC_DBG_SEL |
R/W |
0 |
Debug port select |
0 |
BIT_ADC_PWR_CTRL |
R/W |
0 |
This field is used to power control |
REG_ADC_SW_TMODE
Name: ADC Software Test Mode
Size: 32
Address offset: 0B4h
Read/write access: R/W
Register to set the software test mode
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
BIT_ADC_SW_TMODE |
R/W |
0 |
This bit is used to change the high 4 bits in FIFO.
|
REG_ADC_BRK_CNT
Name: ADC Break Cnt Register
Size: 32
Address offset: 0B8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
RSVD |
R |
- |
Reserved |
15:0 |
ADC_BREAK_TIMEOUT |
R/W |
16’h4fff |
Set a time threshold for waiting to sample. If exceeded, an interrupt will be triggered. |
REG_TM_TH_CTRL0
Name: Thermal Meter Threshold Control Register
Size: 32
Address offset: 0BCh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:16 |
TM_HIGH_WT_THR |
R/W |
16’d827 |
Set the over temperature warning threshold for comparison with TEMP_OUT.Only values greater than 0 are supported 100°C |
15:0 |
TM_LOW_WT_THR |
R/W |
16’d555 |
Set the Low threshold for comparison with TEMP_OUT. -20°C |
REG_TM_TH_CTRL1
Name: Thermal Meter Threshold Control Register
Size: 32
Address offset: 0C0h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:24 |
TM_PWR |
R/W |
8’h69 |
Thm protect password. Tm_highcmp_pt_en,tm_high_pt_thr can be programed only when this value is 8’h69. |
23:17 |
RSVD |
R |
- |
Reserved |
16 |
TM_HIGHCMP_PT_EN |
R/W |
0x0 |
To enable compare tm_out with over temperature protect threshold: When tm_out > tm_high_pt_thr, it will set aon reset.
|
15:0 |
TM_HIGH_PT_THR |
R/W |
16’d882 |
Set over temperature protection threshold for comparison with TEMP_OUT. 125°C |
REG_TM_MAX_CTRL
Name: Thermal Meter Max Temperature Control Register
Size: 32
Address offset: 0C4h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
TM_MAX_EN |
R/W |
0x0 |
Enable max temperature function |
16 |
TM_MAX_CLR |
R/W |
0x0 |
This bit defines clear max temperature
|
15:0 |
TM_MAX |
R |
16’d200 |
These bits define max temperature. |
REG_TM_MIN_CTRL
Name: Thermal Meter Min Temperature Control Register
Size: 32
Address offset: 0C8h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:18 |
RSVD |
R |
- |
Reserved |
17 |
TM_MIN_EN |
R/W |
0x0 |
Enable min temperature function |
16 |
TM_MIN_CLR |
R/W |
0x0 |
This bit defines clear min temperature
|
15:0 |
TM_MIN |
R |
16’d1000 |
These bits define min temperature. |
REG_TM_POW_CTRL
Name: Thermal power ctrl
Size: 32
Address offset: 0CCh
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:2 |
RSVD |
R |
- |
Reserved |
1 |
TM_POW_LAT_ST |
R/W |
0x0 |
Indicates that there is an ADC enable during the power-on process to latch the pow on temperature. The enable state needs to be cleared after taking the temperature data. |
0 |
TM_POW_FORCE_EN |
R/W |
0x1 |
Thermal sensor Force function bit 0: disable force function(default) 1: enable force function |
REG_TM_DBG
Name: Thermal debug ctrl
Size: 32
Address offset: 0D0h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:1 |
RSVD |
R |
- |
Reserved |
0 |
TM_RAW_DBG_EN |
R/W |
0 |
The temperature channel will output raw data instead of the average value |
REG_ADC_DUMMY
Name: ADC Dummy Register
Size: 32
Address offset: 0D4h
Read/write access: R/W
Dummy register
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
DUMMY |
R/W |
ffffh |
Dummy register |
ADC Common Registers
Base Address: 0x40803800
Name |
Address offset |
Access |
Description |
|---|---|---|---|
000h |
R/W |
||
004h |
R/W |
||
00Ch |
R/W |
||
01Ch |
R/W |
||
024h |
R/W |
||
028h |
R/W |
||
030h |
R/W |
||
034h |
R/W |
||
038h |
R/W |
||
03Ch |
R/W |
||
040h |
R/W |
||
044h |
R/W |
||
048h |
R/W |
||
04Ch |
R/W |
||
050h |
R/W |
||
054h |
R/W |
||
070h |
R/W |
||
074h |
R/W |
||
080h |
R/W |
||
084h |
R/W |
REG_ADC_CTRL0
Size: 32
Address offset: 000h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:15 |
RSVD |
R |
- |
Reserved |
14 |
EN_THERMAL |
R/W |
1’b0 |
Thermal sensor enable
|
13:12 |
REG_ASY_DELAY |
R/W |
2’b01 |
Asy SAR ADC compare time. Control the delay of the comparator. If the comparator fails to produce a result for a long time, it will force the output of the result.
|
11 |
RSVD |
R |
- |
Reserved |
10:9 |
SEL_LDO2P5_VOL |
R/W |
‘b01 |
AIF default 01:2.25V |
8:7 |
SEL_LDOAV09_VOL |
R/W |
‘b10 |
AUX ADC 0.9V LDO voltage:
AIF default 10:0.95V; |
6:5 |
RSVD |
R |
- |
Reserved |
4 |
EN_ADC_CKS |
R/W |
‘b0 |
EN_ADC_CKS = 0,ADC_CKS=0 or 1,ADC always Stop to Sample State; EN_ADC_CKS = 1,ADC_CKS=1,ADC Sample State; EN_ADC_CKS = 1,ADC_CKS=0,ADC Sample Finish,ADC compare start; AIF default 1; |
3 |
EN_VREFP_LPF |
R/W |
‘b0 |
When 0.AUX ADC Reference LPF disable; When 1,AUX ADC Reference LPF enable; AIF default 1; |
2 |
EN_META |
R/W |
‘b1 |
EN_META = 1, When ADC compare not finish,force comparator to 0; EN_META = 0, Do nothing; AIF default 1; |
1:0 |
META_DELAY |
R/W |
‘b01 |
EN_META=1,When ADC compare not finish,force comparator to 0; META_DELAY select the delay to force comparator to 0; AIF default 01; |
REG_ADC_CTRL1
Size: 32
Address offset: 004h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
SEL_VREFP_VOL |
R/W |
4’b0100 |
AUX ADC Vrefp voltage:
Cs * VIN = 8C * Vrefp 3C * 5V = 8C * 1.875V 4C * 3.3V = 8C * 1.65V 8C * 1.8V = 8C * 1.8V AIF default 0100: 1.65V; |
REG_POW_CTRL
Size: 32
Address offset: 00Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:10 |
RSVD |
R |
- |
Reserved |
9 |
POW_ADC |
R/W |
‘b0 |
POW_ADC =0.AUX ADC off; POW_ADC =1,AUX ADC on; AIF default 1; |
8 |
POW_AUXADC_MBIAS |
R/W |
‘b0 |
POW_ADC_MBIAS=0,AUX ADC and Touch bias current all off; POW_ADC_MBIAS=1,AUX ADC and Touch bias current on; AIF default 1; |
7 |
RSVD |
R |
- |
Reserved |
6 |
POW_LDO2P5 |
R/W |
‘b0 |
AIF default1; |
5 |
POW_LDOAV09 |
R/W |
‘b0 |
AIF default 1; |
4 |
POW_REFPGEN |
R/W |
‘b0 |
AIF default1; |
3:2 |
RSVD |
R |
- |
Reserved |
1 |
VCCKOFF33V_B |
R/W |
1’b0 |
When 0,Internal DVDD power off, All ADC and Touch off; |
0 |
VCCKOFFB_DV |
R/W |
1’b1 |
When 0,Internal DVDD power off, All ADC and Touch off;
When scan mode , it will tie0, also ISO signal must tie 1 |
REG_DRV_CFG
Size: 32
Address offset: 01Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:2 |
RSVD |
R |
- |
Reserved |
1 |
FORCE_ADC_POW_EN |
R/W |
0 |
Enable ADC decoupling mode, the ADC power signal will be controlled by software |
0 |
RSVD |
R |
- |
Reserved |
REG_POW_CNT0
Size: 32
Address offset: 024h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
PWR_EN_LPF_CNT |
R/W |
12’h18f |
The delay time between pow_mbias and en_vrefp_lpf |
REG_POW_CNT1
Size: 32
Address offset: 028h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:24 |
RSVD |
R |
- |
Reserved |
23:12 |
PWR_ADC_CNT |
R/W |
12’h31f |
The delay time between pow_adc and ck_ad |
11:0 |
PWR_TO_ENADC_CKS |
R/W |
12’h18f |
The delay time between pow_adc and en_adc_cks |
REG_ADC_CLK_HCNT0_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 030h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT0 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt0+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT1_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 034h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT1 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt1+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT2_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 038h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT2 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt2+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT3_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 03Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT3 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt3+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT4_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 040h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT4 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt4+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT5_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 044h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT5 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt5+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT6_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 048h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT6 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt6+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT7_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 04Ch
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT7 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt7+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT8_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 050h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT8 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt8+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_HCNT9_DIV
Name: ADC Channel Clock Divider Register
Size: 32
Address offset: 054h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:12 |
RSVD |
R |
- |
Reserved |
11:0 |
BIT_ADC_CLK_HCNT9 |
R/W |
12’d19 |
This field defines clock driver high level of chn in ADC module. High level =( bit_adc_clk_hcnt9+1) * ip_clk period . hcnt11-13 is rsvd. |
REG_ADC_CLK_COV
Size: 32
Address offset: 070h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31 |
ADC_COV_MODE |
R/W |
1’b0 |
|
30 |
RSVD |
R |
- |
Reserved |
29:26 |
ADC_ISO_CNT |
R/W |
4’d0 |
Control the time of iso ch. if adc_iso_cnt is 0, iso_ch will disable |
25:0 |
RSVD |
R |
- |
Reserved |
REG_ADC_VOL_LIST_0
Size: 32
Address offset: 074h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:4 |
RSVD |
R |
- |
Reserved |
3:0 |
ADC_SEL_VREFP_VOL_0 |
R/W |
4’b0100 |
AUX ADC Vrefp voltage(all chn):
Cs * VIN = 8C * Vrefp 3C * 5V = 8C * 1.875V 4C * 3.3V = 8C * 1.65V 8C * 1.8V = 8C * 1.8V AIF default 0100: 1.65V; |
REG_ADC_PAD_TEST
Size: 32
Address offset: 080h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:5 |
RSVD |
R |
- |
Reserved |
4 |
LP_ADC_FORCE |
R/W |
0h |
Force sw select instead of pinmux input when adc test mode
|
3:0 |
LP_ADC_CH_NUM |
R/W |
0h |
Sw select adc test channel |
REG_DUMMY
Name: Dummy Register
Size: 32
Address offset: 084h
Read/write access: R/W
Bit |
Symbol |
Access |
INI |
Description |
|---|---|---|---|---|
31:0 |
DUMMY |
R/W |
32’h0 |
Dummy register |